Path Planning for Two-Link Navigation in an Unknown Environment using webcam
In this article, we used image processing by a webcam connected on top of the arm robot. The robot navigation is in an unknown environment. Then start point and target point were determined for the robot, so the robot needs to have a program for path planning using Voronoi diagrams to find the pa...
Saved in:
Main Authors: | , , , , |
---|---|
格式: | E-Article |
語言: | English |
出版: |
Trans Tech Publications Ltd.
2010
|
主題: | |
在線閱讀: | http://ir.unimas.my/id/eprint/13627/1/Path%20Planning%20for%20Two-Link%20Navigation%20%28abstract%29.pdf http://ir.unimas.my/id/eprint/13627/ http://www.scientific.net/SSP.166-167.369 |
標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
總結: | In this article, we used image processing by a webcam connected on top of the arm robot.
The robot navigation is in an unknown environment. Then start point and target point were
determined for the robot, so the robot needs to have a program for path planning using Voronoi
diagrams to find the path. After the possible path for moving the robot was found, the route
information obtained was sent to the arm robot. The arm robot moves in the workspace and any
time new information was processed via the webcam. The program was written using MATLAB
software which at controls the robot’s movement the unknown environment. |
---|