封面图片

Open-cell copper foam joining: joint strength and interfacial behaviour

A copper (Cu) foam was brazed with Cu-4.0Sn-9.9Ni-7.8P filler foil for joint strength and interface analysis. Brazed 50 pores per inch (PPI) Cu foam yielded a maximum compressive strength of 14.4 MPa with a 127% increment compared to nonbrazed Cu foam. 15 PPI Cu foam produced a maximum shear strengt...

Saved in:

书目详细资料
Main Authors:	Zahri, Nur Amirah Mohd, Yusof, Farazila, Ariga, Tadashi, Haseeb, A.S. Md. Abdul, Mansoor, Muhammad Adil, Sukiman, Nazatul Liana
格式:	Article
出版:	Taylor & Francis 2019
主题:	TJ Mechanical engineering and machinery
在线阅读:	http://eprints.um.edu.my/23981/ https://doi.org/10.1080/02670836.2019.1661649
标签:	添加标签没有标签, 成为第一个标记此记录!

相似书籍

Effect of porous copper pore density on joint interface: microstructure and mechanical analysis
由: Zahri, Nur Amirah Mohd, et al.
出版: (2022)

Brazing of porous copper foam/copper with amorphous Cu-9.7Sn-5.7Ni-7.0P (wt%) filler metal: interfacial microstructure and diffusion behavior
由: Zahri, Nur Amirah Mohd, et al.
出版: (2020)

$Deformation and fracture behavior of sandwiched copper foam brazed joint using amorphous copper-tin-nickel-phosphorus filler$

Deformation and fracture behavior of sandwiched copper foam brazed joint using amorphous copper-tin-nickel-phosphorus filler
由: Mohd Zahri, Nur Amirah, et al.
出版: (2021)

Interfacial microstructure and strength of brazed copper/porous copper foam towards the effect of porous copper foam pore density and brazing holding timeEinfluss von Porendichte des Kupferschaums und Lothaltezeit auf das Grenzflachengefuge und die Festigkeit von Kupfer-Kupferschaum-Lotverbindungen
由: Mohd Zahri, N. A., et al.
出版: (2021)

Physical properties of Sn58Bi-xNi lead-free solder and its interfacial reaction with copper substrate
由: Kanlayasiri, Kannachai, et al.
出版: (2015)

Investigation on Strength and Microstructural Evolution of Porous Cu/Cu Brazed Joints Using Cu-Ni-Sn-P Filler
由: Sami, Mian Muhammad, et al.
出版: (2020)

Effect of copper based filler composition on the strength of brazed joint
由: A. J. S., Hanifah, et al.
出版: (2019)

Brazeability and mechanical properties of Ag-Cu-Sn brazing filler metals on copper-brazed joint
由: Basri, D.K., et al.
出版: (2014)

Mechanical and microstructure analysis of copper to copper foam brazing using copper-tin nickel-phosphorus amorphous filler alloys / Nur Amirah Mohd Zahri
由: Nur Amirah , Mohd Zahri
出版: (2021)

Interfacial Reactions And Electromigration In Lead-Free Solder Joints With Copper And Au-Ni Surface Finished Copper Substrates
由: Binh, Duong Ngoc
出版: (2009)

Laser lap joining of dissimilar materials: A review of factors affecting joint strength
由: Tamrin, K.F., et al.
出版: (2013)

Laser Lap Joining of Dissimilar Materials: A Review of Factors Affecting Joint Strength
由: Tamrin, K. F., et al.
出版: (2013)

The study of joining strength based on differential joining technique
由: Mohd Nadzrizal, Mohamad Ghaazali
出版: (2013)

Effect of copper based fillers composition the strength of brazed joint
由: Aiman, Mohd Halil, et al.
出版: (2018)

Hemming for Joining High Strength Steel Sheets
由: Zamzuri, Hamedon, et al.
出版: (2014)

Grain size stability of interfacial intermetallic compound in Ni and Co nanoparticle-doped SAC305 solder joints under electromigration
由: Bashir, M. Nasir, et al.
出版: (2022)

Interfacial reaction layer and tensile shear strength of AI 6063 alloy/stainless steel 316L spot welded joint
由: Mazlee, Mohd Noor, et al.
出版: (2011)

Influence of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti lap joints
由: Auwal, S.T., et al.
出版: (2019)

Replacing Ground Rod Joining Cable from Copper to Galvanized Iron
由: Prashobh, Karunakaran, et al.
出版: (2016)

The influence of 71Ag-28Cu-1Mg filler alloy on microstructure and properties of spot brazed Titanium/Nickel joint
由: Hussain, Zuhailawati, et al.
出版: (2010)

The evolution of interfacial intermetallic compound growth and solder joint strength of Sn-40Pb/Cu under thermal aging / Ramani Mayappan
由: Mayappan, Ramani
出版: (2024)

Microstructure and mechanical properties of micro-resistance spot welding between stainless steel 316L and Ti-6Al-4V
由: Mansor, Muhammad Safwan Mohd, et al.
出版: (2018)

Experimental study between galvanized iron and copper as joining cable in earth system
由: Avylia Noami, Anak Nelson
出版: (2017)

Experimental study between galvanized iron and copper as joining cable in earth system
由: Avylia Noami, Anak Nelson
出版: (2017)

Interfacial shear strength of Polylactic Acid-Kenaf fibre biocomposites
由: Anuar, Hazleen, et al.
出版: (2011)

Effects of Resin Binder on Characteristics of Sintered Aluminum–Copper Nanopaste as High-Temperature Die-Attach Material
由: Siah, Meng Zhe, et al.
出版: (2019)

Interfacial reactions during soldering of lead-free solders on copper and nickel substrates
由: Idris, Siti Rabiatull Aisha
出版: (2012)

Studying the influence of varying root opening of joint design on the weld strength / Akramin Mohd Zuhudi
由: Mohd Zuhudi, Akramin
出版: (2005)

Static strength of tubular T-joint
由: Yong , Teck Choi
出版: (2004)

Strength of reinforced fibrous foamed concrete-filled hollow section
由: Abd Rahman, Norashidah, et al.
出版: (2018)

A study of the spot welding time on joining strength of the mild steel plates
由: Mohd Rafa'at, Mohd Ibrahim
出版: (2008)

An experimental strength of coach peel rivets joining similar and dissimilar sheet materials
由: Rohani, Daud
出版: (2008)

Metal Joining
由: Universiti Malaysia Perlis (UniMAP)
出版: (2017)

Join The Organization
由: China, Press (Northern)
出版: (2017)

Join the organization
由: China, Press
出版: (2017)

Joining Technology
由: MFI
出版: (2014)

Joining Technology
由: UniKL MFI
出版: (2015)

Joining Technology
由: MFI
出版: (2014)

Stress distribution of secondary bending in single-lap bolted joints with dissimilar joining plates and plate types
由: Ahmad, Hilton
出版: (2016)

Influence of laser power on bonding strength for low purity copper wire bonding technology
由: Singh, Gurbinder, et al.
出版: (2019)