Cover Image

Effect of Raster Angle and Infill Pattern on the In-Plane and Edgewise Flexural Properties of Fused Filament Fabricated Acrylonitrileâ��Butadieneâ��Styrene

Fused Filament Fabrication (FFF) is a popular additive manufacturing process to produce printed polymer components, whereby their strength is highly dependent on the process parameters. The raster angle and infill pattern are two key process parameters and their effects on flexural properties need f...

Full description

Saved in:

Bibliographic Details
Main Authors:	Qayyum, H., Hussain, G., Sulaiman, M., Hassan, M., Ali, A., Muhammad, R., Wei, H., Shehbaz, T., Aamir, M., Altaf, K.
Format:	Article
Published:	MDPI 2022
Online Access:	http://scholars.utp.edu.my/id/eprint/34273/ https://www.scopus.com/inward/record.uri?eid=2-s2.0-85144901373&doi=10.3390%2fapp122412690&partnerID=40&md5=b5fd257d9e880e2b0276fab458bd9fa2
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Characterisation Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication
by: Mohd Farhan Han, Syaza Najwa
Published: (2021)

Thermal And Melt Flow Behaviour Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication
by: Mohammad Taha, Mastura, et al.
Published: (2019)

Effects Of Moisture On Acrylonitrile Butadiene Styrene (Abs) Filament Material In Fused Deposition Modeling (Fdm) Rapid Prototyping Machine
by: Halidi, Siti Nur Amalina Mohd
Published: (2013)

Correlation Of Tribo-Mechanical Properties Of Internal Geometry Structures Of Fused Filament Fabrication 3D-Printed Acrylonitrile Butadiene Styrene
by: Mohamad Norani, Mohamad Nordin, et al.
Published: (2020)

The effect of employing different raster orientations on the mechanical properties and microstructure of Fused Deposition Modeling parts
by: A. W. , Fatimatuzahraa, et al.
Published: (2011)

$The influence of in-plane raster angle on tensile and fracture strengths of 3D-printed PLA specimens$

The influence of in-plane raster angle on tensile and fracture strengths of 3D-printed PLA specimens
by: Ayatollahi, Majid R., et al.
Published: (2020)

Natural fibre filament for Fused Deposition Modelling (FDM): a review
by: Aida, H. J., et al.
Published: (2021)

Synergistic Effect Of Loads And Speeds On The Dry Sliding Behaviour Of Fused Filament Fabrication 3D-Printed Acrylonitrile Butadiene Styrene Pins With Different Internal Geometries
by: Abdollah, Mohd Fadzli bin, et al.
Published: (2020)

Edgewise compression of composite sandwich panels: effect of core hybridization
by: Tarlochan, Faris, et al.
Published: (2005)

Natural fibre filament for Fused Deposition Modelling (FDM): a review
by: Razali, Nadlene, et al.
Published: (2021)

The energy-absorbing characteristics of filament wound hybrid carbon fiber-reinforced plastic/polylactic acid tubes with different infill pattern structures
by: Quanjin, Ma, et al.
Published: (2019)

Flatwise and edgewise compression strengths of sandwich panel with silica aerogel mat
by: Tay, Lee Thin, et al.
Published: (2021)

Characterization and processing of composite PP/UHMWPE filament for fused deposition modelling application
by: Ahmed Bala, Abduladim Salem
Published: (2017)

Investigation of PLA deposition on preheated ABS of a fused filament fabrication method
by: Nur Anis Syahirah Ashari
Published: (2022)

Study of melting of low temperature metal for fused filament fabrication (fff) process
by: Ong Tun Yau
Published: (2022)

Investigation of reheat post- processing using fused filament fabrication (FFF) method
by: Jay Nelson Segilit
Published: (2022)

Review on fused deposition modelling extruder types with their specialities in filament extrusion process
by: Md Azhar, Muhammad Afif, et al.
Published: (2023)

Review on fused deposition modelling extruder types with their specialities in filament extrusion process
by: Md Azhar, Muhammad Afif, et al.
Published: (2023)

The energy-absorbing characteristics of filament wound hybrid carbon fiber-reinforced plastic/polylactic acid tubes with different infill pattern structures
by: Quanjin, M. A., et al.
Published: (2019)

Ultrasonic Assisted Fused Deposition Modeling For Acrylonitrile Butadiene Styrene Waste Recycling
by: Ting, Kung Hieng
Published: (2021)

Eco infills
by: Nurul Afifah, Ahmad Lutpi, et al.
Published: (2015)

Developing composite filament from recycled polypropylene and agriculture waste for fused deposition modeling
by: Lim, Kar Yap
Published: (2023)

Mechanical behaviour and compatibility analysis of thermoplastic polyurethane polycaprolactone-based new fused deposition modelling filament composite
by: Raveverma, P., et al.
Published: (2018)

Effect Of Fused Deposition Modelling Fabrication Parameters On The Tensile Properties Of Acrylonitrile Butadiene Styrene
by: Chua, Jing Ting
Published: (2018)

Mechanical behaviour of acrylonitrile butadiene styrene (ABS) specimen by fused deposition modelling (FDM)
by: Selvamani, Sathish Kumar
Published: (2019)

Mechanical Characteristics Of Oil Palm Fiber Reinforced Thermoplastics As Filament For Fused Deposition Modeling (FDM)
by: Ahmad, Mohd Nazri, et al.
Published: (2020)

Fabrication of Polylactic Acid/Wax/Polyethylene Glycol Composite Filament for Fused Deposition Modeling (FDM)
by: Mohammad Rahmat, Bin Derise
Published: (2020)

Evaluation of functionally graded architecture using fused filament fabrication technique for bone scaffold applications
by: Noordin, Muhammad Azfar, et al.
Published: (2022)

Investigation of characteristics of Kenaf/PLA filament for ankle foot orthosis using fused deposition modelling
by: Shahar, Farah Syazwani
Published: (2021)

Additive Manufacturing of Copper-ABS Filament by Fused Deposition Modeling (FDM) / N Sa’ude ...[et al.]
by: Sa’ude, N, et al.
Published: (2018)

Extraction of visual information from simplified raster images
by: R. Badlishah, Ahmad, et al.
Published: (2010)

Topographic map updating using raster based datasets
by: Haron, Nor Fadzillah
Published: (2020)

Investigation of the effect of layer thickness and infill material percentage on the performance of low-cost and commercial fused deposition modelling / Muhammad Syamsuzzaman Shamsuddin
by: Muhammad Syamsuzzaman, Shamsuddin
Published: (2013)

Investigation of ABS-Oil Palm Fiber (Elaeis guineensis) composites filament as feedstock for fused deposition modeling
by: Ahmad, Mohd Nazri, et al.
Published: (2022)

Investigation of ABS–oil palm fiber (Elaeis guineensis) composites filament as feedstock for fused deposition modeling
by: Ahmad, Mohd Nazri, et al.
Published: (2023)

Flatwise and edgewise compression properties of composite PLA core fabricated via additive manufacturing technique
by: Mat Jusoh, Muhamad Shahirul, et al.
Published: (2022)

Flatwise and edgewise compression properties of composite PLA core fabricated via additive manufacturing technique
by: Mat Jusoh, Muhamad Shahirul, et al.
Published: (2022)

Tropical tree crown delineation on the raster LiDAR data using watershed segmentation
by: Yusop, M. Y. M. D.
Published: (2020)

Edgewise bending properties of laminated veneer lumber manufactured from low density woods mixed with keruing (Dipterocarpus spp.) veneers
by: H'ng, Paik San, et al.
Published: (2005)

Mechanical Behaviour and Compatibility Analysis of Thermoplastic Polyurethane/ Polycaprolactone-Based New Fused Deposition Modelling Filament Composite / P. Raveverma ...[et al.]
by: Raveverma, P., et al.
Published: (2018)