Optimization of reflow profile for copper pillar with SAC305 solder cap FCCSP
The current trend of electrical devices development is progressing towards miniaturization, multi-function and high density, device integration and fine pitch in a smaller package size. This led to the invention of copper pillar bumps which acts as a connection between the dies to its corresponding...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Other Authors: | |
| Format: | Article |
| Published: |
Springer
2024
|
| Subjects: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| id |
my.uniten.dspace-34676 |
|---|---|
| record_format |
dspace |
| spelling |
my.uniten.dspace-346762024-10-14T11:21:39Z Optimization of reflow profile for copper pillar with SAC305 solder cap FCCSP Zainudin W.Z.Z.W. Yong T.C. Hui T.C. Kar Y.B. Hoong W.Y. 58072690400 16029485400 55340767200 58072938600 58071699600 Chip scale packages Copper Defects Flip chip devices Soldering 'current Copper pillars Device development Electrical devices Liquidus Miniaturisation Optimisations Ramp-rate Soak time Solder joints Substrates The current trend of electrical devices development is progressing towards miniaturization, multi-function and high density, device integration and fine pitch in a smaller package size. This led to the invention of copper pillar bumps which acts as a connection between the dies to its corresponding substrate, which allows the fabrication of smaller semiconductor devices. The dies were mounted onto the substrate by undergoing mass reflow process where the SAC305 solder from the copper pillar bumps and substrate bumps will melt together and solidify to form a solder joint. The quality of the solder joint is influenced by the parameters that govern the reflow profile, which are ramp rate, soak time, time above liquidus time, peak temperature and cooling rate. If the reflow profile is not properly optimized, defects such as voids in the solder joint can pose a reliability issue for the packaged unit. Therefore, in this paper, ramp rate, soak time and time above liquidus of reflow profiles for die utilizing copper pillar bumps with SAC305 as its solder material was studied and optimized in finding the recommended range of each parameter of the reflow profiles that yield the least voiding in the solder joint. The experiment was conducted by varying the reflow profile parameter which are ramp rate, soak time and time above liquidus, which the solder joint cross section and X-ray images were then analysed to study its influences. Additional experiment that investigates flux outgassing rate of different flux activity levels and the influence of component standoff height and mis-alignment offset towards solder-creeping defect were conducted in this article. � 2023, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature. Final 2024-10-14T03:21:39Z 2024-10-14T03:21:39Z 2023 Article 10.1007/s10854-022-09661-0 2-s2.0-85146558827 https://www.scopus.com/inward/record.uri?eid=2-s2.0-85146558827&doi=10.1007%2fs10854-022-09661-0&partnerID=40&md5=3e8254b313a9ced2ee3b145dd8ec3519 https://irepository.uniten.edu.my/handle/123456789/34676 34 3 187 Springer Scopus |
| institution |
Universiti Tenaga Nasional |
| building |
UNITEN Library |
| collection |
Institutional Repository |
| continent |
Asia |
| country |
Malaysia |
| content_provider |
Universiti Tenaga Nasional |
| content_source |
UNITEN Institutional Repository |
| url_provider |
http://dspace.uniten.edu.my/ |
| topic |
Chip scale packages Copper Defects Flip chip devices Soldering 'current Copper pillars Device development Electrical devices Liquidus Miniaturisation Optimisations Ramp-rate Soak time Solder joints Substrates |
| spellingShingle |
Chip scale packages Copper Defects Flip chip devices Soldering 'current Copper pillars Device development Electrical devices Liquidus Miniaturisation Optimisations Ramp-rate Soak time Solder joints Substrates Zainudin W.Z.Z.W. Yong T.C. Hui T.C. Kar Y.B. Hoong W.Y. Optimization of reflow profile for copper pillar with SAC305 solder cap FCCSP |
| description |
The current trend of electrical devices development is progressing towards miniaturization, multi-function and high density, device integration and fine pitch in a smaller package size. This led to the invention of copper pillar bumps which acts as a connection between the dies to its corresponding substrate, which allows the fabrication of smaller semiconductor devices. The dies were mounted onto the substrate by undergoing mass reflow process where the SAC305 solder from the copper pillar bumps and substrate bumps will melt together and solidify to form a solder joint. The quality of the solder joint is influenced by the parameters that govern the reflow profile, which are ramp rate, soak time, time above liquidus time, peak temperature and cooling rate. If the reflow profile is not properly optimized, defects such as voids in the solder joint can pose a reliability issue for the packaged unit. Therefore, in this paper, ramp rate, soak time and time above liquidus of reflow profiles for die utilizing copper pillar bumps with SAC305 as its solder material was studied and optimized in finding the recommended range of each parameter of the reflow profiles that yield the least voiding in the solder joint. The experiment was conducted by varying the reflow profile parameter which are ramp rate, soak time and time above liquidus, which the solder joint cross section and X-ray images were then analysed to study its influences. Additional experiment that investigates flux outgassing rate of different flux activity levels and the influence of component standoff height and mis-alignment offset towards solder-creeping defect were conducted in this article. � 2023, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature. |
| author2 |
58072690400 |
| author_facet |
58072690400 Zainudin W.Z.Z.W. Yong T.C. Hui T.C. Kar Y.B. Hoong W.Y. |
| format |
Article |
| author |
Zainudin W.Z.Z.W. Yong T.C. Hui T.C. Kar Y.B. Hoong W.Y. |
| author_sort |
Zainudin W.Z.Z.W. |
| title |
Optimization of reflow profile for copper pillar with SAC305 solder cap FCCSP |
| title_short |
Optimization of reflow profile for copper pillar with SAC305 solder cap FCCSP |
| title_full |
Optimization of reflow profile for copper pillar with SAC305 solder cap FCCSP |
| title_fullStr |
Optimization of reflow profile for copper pillar with SAC305 solder cap FCCSP |
| title_full_unstemmed |
Optimization of reflow profile for copper pillar with SAC305 solder cap FCCSP |
| title_sort |
optimization of reflow profile for copper pillar with sac305 solder cap fccsp |
| publisher |
Springer |
| publishDate |
2024 |
| _version_ |
1814061132409733120 |
| score |
13.222552 |