Investigation of Wheel Robot Grouser Width Parameter Effect on Robot Mobility in Soft Sand Terrain Using Sand Test Bed

Much research has been done to investigate the most ideal grouser parameters to improve a robot’s wheel mobility in sandy terrain. However, their area of research mainly focused on the normal wheel with fixed grousers. This paper showcases the study of performance of the assistive grouser wheel movi...

Full description

Saved in:
Bibliographic Details
Main Authors: Ikmanizardi, Basri, Intan Nur Aqiella, Che Aziz, Ahmad Najmuddin, Ibrahim, Fukuoka, Yasuhiroo
Format: Conference or Workshop Item
Language:English
English
Published: Springer Singapore 2024
Subjects:
Online Access:http://umpir.ump.edu.my/id/eprint/41219/1/Investigation%20of%20Wheel%20Robot%20Grouser%20Width%20Parameter%20Effect%20on%20Robot.pdf
http://umpir.ump.edu.my/id/eprint/41219/2/Investigation%20of%20Wheel%20Robot%20Grouser%20Width%20Parameter%20Effect%20on%20Robot%20Mobility%20in%20Soft%20Sand%20Terrain%20Using%20Sand%20Test%20Bed.pdf
http://umpir.ump.edu.my/id/eprint/41219/
https://doi.org/10.1007/978-981-99-8819-8_16
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Much research has been done to investigate the most ideal grouser parameters to improve a robot’s wheel mobility in sandy terrain. However, their area of research mainly focused on the normal wheel with fixed grousers. This paper showcases the study of performance of the assistive grouser wheel moving on a flat surface sandy terrain attached with different grouser width parameters. Two different grouser shapes were fabricated which consist of C-Shape and Wider C-Shape, with two configurations forward facing and inverse. For each grouser set, one of the grousers was attached with 2 load cell sensors used to measure force. The grousers were tested across a total of 3 runs to identify its total average traction force acting on the grouser during the wheel’s movement. The results show increased maximum positive and negative forces when the grouser width is increased, which resulted in less net traction force. The inverse configuration also showed better results than forward facing. This shows that for assistive mechanism, increasing the width of the grouser may not increase the effectiveness of the grouser in generating traction force.