Clean energy storage device derived from biopolymers with moderate charge-discharge cycles: Structural and electrochemical properties

This work explores a green biopolymer (GBP) energy storage system to address the growing problem of microplastics that can harm our health. A GBP was made using solution casting with chitosan (CHN) and starch from potato (SPC) as the polymer hosts. Sodium thiocyanate (NaSCN) as Na+ cation provider a...

Full description

Saved in:
Bibliographic Details
Main Authors: Aziz, Shujahadeen B., Abdulwahidc, Rebar T., Mohammed, Sewara J., Aziz, Dara M., Hamsan, Muhamad H., Halim, Norhana Abdul, Al-Saeedi, Sameerah I., Karim, Wrya O., Woo, Haw Jiunn, Kadir, Mohd F. Z.
Format: Article
Published: Elsevier 2024
Subjects:
Online Access:http://eprints.um.edu.my/44231/
https://doi.org/10.1016/j.jiec.2023.11.044
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:This work explores a green biopolymer (GBP) energy storage system to address the growing problem of microplastics that can harm our health. A GBP was made using solution casting with chitosan (CHN) and starch from potato (SPC) as the polymer hosts. Sodium thiocyanate (NaSCN) as Na+ cation provider and glycerol as an environmentally friendly plasticizer were mixed with CHN:SPC host polymers to prepare GBP electrolytes. The electrochemical impedance spectroscopy (EIS) results confirm the boost in DC conductivity. From the AC conductivity spectra, regions ascribing to EP and DC contributions are demonstrated. X-ray diffraction (XRD) and FTIR characterization provide evidence of salt dissociation and amorphous phase improvement. The determination of the ion fraction was achieved by means of TNM. The electrochemical stability of the conducting film was observed to be maintained up to 2.75 V. Cyclic voltammetry (CV), revealing no sign of charge transfer occurring through Faradaic processes at the interface between the electrode and electrolyte. The galvanostatic charge-discharge (GCD) plot displayed a triangular pattern, indicating a low voltage drop and a notable specific capacitance of 70 F/g. Moreover, the EDLC (electrical double-layer capacitor) exhibited an average power density of 1120 W/kg and an energy density of 9.11 Wh/kg.