Performance of adhesive formulation using glutinous, sago and tapioca flour / Alain Dillon Anak Michael Jopie
The performance of adhesive formulation using glutinous, sago and tapioca flour had been studied. This exploratory research was for determining the use of different types of natural adhesive towards different types of substrates. This includes the, production of natural adhesive by using glutinou...
Saved in:
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | English |
| Published: |
Faculty Of Applied Sciences
2019
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/24979/1/PPb_ALAIN%20DILLON%20ANAK%20MICHAEL%20JOPIE%20AS%20C%2019_5.PDF http://ir.uitm.edu.my/id/eprint/24979/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The performance of adhesive formulation using glutinous, sago and tapioca
flour had been studied. This exploratory research was for determining the use
of different types of natural adhesive towards different types of substrates. This
includes the, production of natural adhesive by using glutinous sago and
tapioca flour as the main raw material according to a fixed ratio of formulation.
Adhesives were then carefully observed and evaluated in terms of its changes
of state or any kind of obvious observation when the application of heat
treatment occur. Observation adhesive condition and color upon storage for 3
weeks at room temperature was made. This shows that glutinous type of
adhesive resulting in the highest degradation which released rancid odor and
changed its state to aqueous. While for the lowest degradation level was sago
adhesive which remained in paste form and has absent of odor. Evaluation of
bonding performance of the three adhesives was done using maximum load
(ML) and internal bonding (IB). In this assessment, four different types of
substrates veneer, cardboard, paper and plastic were used as to determine the
bonding strength of respective natural adhesives. With this, sago was the best
type of adhesive among the other two types of adhesives which react
effectively with amount of glue spread value, GSV (79.24g/m2), ML (25.06N)
and IB (O.04MPa). Besides that, glutinous has the lowest properties of adhesive
compared to the other two types of adhesives to react with the amount of GSV
(64.61g/m2), ML (17.73N) and IB (O.03MPa). In terms of substrates, veneer has
the best reaction towards the GSV (115.42g/mZ), ML (41.74N) and IB
(6.48xl0-2 MPa). While plastic have poor reaction towards GSV (20.69g/m2),
ML (11.69N) and IB (1.81xl0-2 MPa). |
|---|