Cover Image

CFD Analysis of PDC Drill Bit Designed for Interbedded Formation Drilling.

Saved in:

Bibliographic Details
Main Author:	Peter, Karen Cherembang Anak
Format:	Final Year Project
Published:	2024
Subjects:	TP Chemical technology
Online Access:	http://utpedia.utp.edu.my/id/eprint/28818/
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

FEM Analysis of PDC Drill Bit Cutter Efficiency Designed for Interbedded Formation Drilling.
by: Leslie Ramsay, Mary Ilyona Anak
Published: (2024)

CFD Analysis of PDC Drill Bit Nozzle Efficiency Designed for Interbedded Formation Drilling.
by: Zamri, Harith
Published: (2024)

Reverse Engineering of PDC Drill Bit
by: Mohd Zolkafly, Muhammad Ariff Zaky
Published: (2013)

Analysis and Simulation of PDC Drill Bit Design In Mitigating Stick and Slip
by: Mohammad Izani, Nik Mohd Hakim
Published: (2016)

EFFECT OF PDC BIT DESIGN AND DRILLING FLUID ON RATE OF PENETRATION FOR MULTI-LAYER FORMATION
by: BINTI MOHD HABIB, NURFATIN ADIBAH
Published: (2014)

Improving rate of penetration for PDC drill bit using reverse engineering
by: Abdul-Rani, A.M., et al.
Published: (2014)

EFFECT OF PDC BIT WEAR AND OPERATING PARAMETERS ON OIL-WELL DRILL-STRING DYNAMICS
by: Yousef Hussein, Hamza Tayseer
Published: (2015)

Effects of Drill String Movement and Changes in PDC Bit Geometry on Mud Flow Behavior
by: Rakha Mohamed, Moustafa Ahmed
Published: (2015)

PDC Drill Bit Design Improvement using Reverse Engineering Method to Analyze Effect on Rate of Penetration
by: Ismail, Mohamad Zamri
Published: (2013)

Finite Element Analysis of Rock-Cutter Interaction in Drilling Operation using Single Cutter PDC Bit
by: Nawawi, Muhammad Farhan
Published: (2018)

Study of the Cutter Design of PDC Drill Bits on Effect of Back Rake Angle and Size of the Cutter on Wear Rate
by: Fauzi, Mohamad Azrin
Published: (2015)

Wear Analysis On Different Customized Twist Drill Bit Designs In Drilling Cfrp Panel
by: Hashimi, Nur Hatin Raihana
Published: (2021)

DEVELOPMENT OF FUNCTIONAL PROTOTYPE OF STEEL PDC DRILL BIT BODY BY USING 3D PRINTING TECHNIQUE AND INVESTMENT CASTING
by: Hairi, Muhd Helmie Fiqri
Published: (2015)

MODIFICATION AND FABRICATION OF ENHANCED DRILL-BIT DESIGN
by: Mahmoud Khairy Ali, Emadeldin Ali
Published: (2015)

Analysis of Fixed Cutter Bit for Directional Drilling in Hard Formation
by: Sennjiv , Allagu
Published: (2018)

DRILLING THROUGH AN INTERBEDDED SAND-SHALE SEQUENCED HETEROLITHIC RESERVOIR: MANAGING KICKS AND LOSSES
by: ZulFadhli Putra Haji Ya’akub, Haji Muhammad
Published: (2012)

Drilling fluid waste management in drilling for oil and gas wells
by: Ismail, A. R., et al.
Published: (2017)

Formation damage using palm oil ester based drilling fluid
by: Md., A. A., et al.
Published: (2008)

A review on the effect of nanoparticle in drilling fluid on filtration and formation damage
by: Ibrahim, Mohamad Arif, et al.
Published: (2022)

THE ANALYSIS OF PDC CUTTER CHARACTERISTIC IN HARD FORMATION DRILLING RELATING TO WEAR (BACK & SIDE RAKE ANGLE)
by: Nasir Gathoth Subroto, Affan
Published: (2015)

Surgical drill bit design and thermomechanical damage in bone drilling: A review
by: Mohd Faizal, Ali Akhbar, et al.
Published: (2021)

Drill Cuttings Treatment by Bioremediation
by: Abu Bakar, Siti Halizah
Published: (2015)

Managed pressure drilling in Malaysia
by: Ishak, Nur Syazana
Published: (2016)

Prototype Manufacturability of PDC Drill Bit Body using Sacrificial Patterns with Wax Materials and using 3D Printing Technology
by: Jian, Chou Zhi
Published: (2014)

Experimental investigation of hole cleaning in directional drilling by using nano-enhanced water-based drilling fluids
by: Boyou, Natalie Vanessa, et al.
Published: (2019)

Coiled Tubing Drilling for offshore wells
by: Ya'acob, Muhammad Shahhimi
Published: (2018)

The study of laser drilling of polymeric material
by: Mohd Khairi Azri, Shapie
Published: (2013)

Optimization of drilling hydraulics in vertical holes
by: Richard Lado Longwa Milla, Richard Lado
Published: (2008)

Drilling of bone: Effect of drill bit geometries on thermal osteonecrosis risk regions
by: Mohd Faizal, Ali Akhbar, et al.
Published: (2019)

Lightweight biopolymer drilling fluid for underbalanced drilling: An optimization study
by: Nee, L.S., et al.
Published: (2015)

Improving the lifting capacity of drilled cuttings using henna leaf extracts and lignite in bentonite water-based drilling mud
by: Oseh, J. O., et al.
Published: (2019)

Hole Quality Assessment Of Drilled Carbon Fiber Reinforced Polymer (Cfrp) Panel Using Various Drill Bit Design
by: Kamaruzaman, Muhammad Faris Shauqi
Published: (2021)

Managing drilling mud weight using ilmenite
by: Ismail, Issham, et al.
Published: (1999)

Recent advances of modified polyacrylamide in drilling technology
by: Koh, Jin Kwei, et al.
Published: (2022)

STUDY ON DYNAMICS OF PDC BIT ON MULTI-LAYERED FORMATION USING ANSYS – EXPLICIT DYNAMICS / AUTODYN
by: A/L Indran, Kirsanth
Published: (2015)

STUDY ON DYNAMICS OF PDC BIT ON USING ANSYS-AUTODYN/EXPLICIT DYNAMICS ON SINGLE-LAYERED FORMATION
by: Alias, Muhammad Mahfuz
Published: (2015)

Parameters optimization of micro drilling process for CFRP using two flute solid carbide drill bit
by: Md Nasir, Nur Syuhada
Published: (2021)

Numerical Investigation of PDC Cutterâ��Rock Interaction in Drilling Operation Using SPH
by: Paramananthan, N.K.N., et al.
Published: (2023)

Bit Selection Using Drilling Data By Artificial Neural Networks
by: Watalingam, Prethipkumar
Published: (2014)

CASE STUDY ON DIFFERENT TYPES OF DRILLING BITS AND THE RATE OF PENETRATION
by: KAMEL EBEDO, MOHAMED ABDELHAMID
Published: (2011)