Synthesis and optimization of multilevel refrigeration systems using generalized disjunctive programming
The synthesis and optimization of multilevel refrigeration systems is challenging because it's a highly non-linear, multi-variable, and multi-modal problem. This work presents a novel approach to develop a complete generalized disjunctive programming model for the synthesis and optimization of...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Published: |
Elsevier Ltd
2022
|
| Online Access: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85131399224&doi=10.1016%2fj.compchemeng.2022.107856&partnerID=40&md5=98f010b8992fb77acbadb5c6158495a0 http://eprints.utp.edu.my/33375/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The synthesis and optimization of multilevel refrigeration systems is challenging because it's a highly non-linear, multi-variable, and multi-modal problem. This work presents a novel approach to develop a complete generalized disjunctive programming model for the synthesis and optimization of multilevel refrigeration systems. The model is based on the application of mass, energy, and thermodynamic model equations and developed to optimize the total shaft work requirement of the system. The presented model is very systematic, easily manageable, and can be extendable to include all design features for refrigeration systems. The model is solvable using advanced solution algorithms such as the Logic-based branch and bound because of it's disjunctive nature. Thus the solution is sought in reduced space and avoids the full scale as is the case with Mixed integer linear/non-linear models. The model solution yields optimal temperature/pressure levels, mass flow rates, and the shaft work consumption. A case study of the precooling cycle of the propane pre-cooled mixed refrigerant (C3MR) LNG process is used to test the proposed model. The model results are validated by simulation using Aspen Hysys software. Shaft work savings of up to 12.3 are obtained from the model results against the base case. Preliminary estimations show that cost savings of up to 2.55 MM/y are realizable against the base case. © 2022 Elsevier Ltd |
|---|