Investigation and measurement of copper nanofluid impact on thermal efficiency of solar collectors
This study compared the impacts of using copper nanofliud to enhance the efficiency of flat solar collectors with closed loop and under forced convection heat transfer circumstances to traditional work fluids. Various concentrations of nanoparticles in water and water/glycol, from 250ppm to 3000ppm,...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Conference or Workshop Item |
| Published: |
EDP Sciences
2014
|
| Online Access: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-84904959187&doi=10.1051%2fmatecconf%2f20141302014&partnerID=40&md5=c5625aba5f57fe009e895c1270ad70b9 http://eprints.utp.edu.my/32301/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This study compared the impacts of using copper nanofliud to enhance the efficiency of flat solar collectors with closed loop and under forced convection heat transfer circumstances to traditional work fluids. Various concentrations of nanoparticles in water and water/glycol, from 250ppm to 3000ppm, were examined for volume fraction impact. Results indicate that the laboratory tests were different from those under real conditions because of the high concentration of nanoparticles used in laboratory tests; however, by using nanofluid (even with low concentrations around 0.3) solar collector efficiency improved (3.2).Results have also shown that the use of copper nanofluid in ethylene glycol as the base fluid causes a significant reduction in collector efficiency, due to the increase in viscosity. However, using higher flow rates caused the heat transfer rate to rise because of increased turbulence. © 2014 Owned by the authors, published by EDP Sciences. |
|---|