Cover Image

Sliding friction behavior of sintered NI-CR composites with solid lubricants

Saved in:

Bibliographic Details
Main Authors:	Wan, F.M., Amir, A.K., Pierre, B., Olivier, D.-D., Clement, P., Abdelilah, L., Faiz, A.
Format:	Article
Published:	Trans Tech Publications Ltd 2021
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85101968826&doi=10.4028%2fwww.scientific.net%2fKEM.875.272&partnerID=40&md5=931f5976e3ccdb6393474da88ca72bee http://eprints.utp.edu.my/24050/
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Microstructure and surface characterization of Ni-Cr based composites containing variable solid lubricants
by: Wan Farhana, Mohamad, et al.
Published: (2020)

Microstructure and surface characterization of Ni-Cr based composites containing variable solid lubricants
by: Mohamad, W.F., et al.
Published: (2020)

Microstructure and surface characterization of Ni-Cr based composites containing variable solid lubricants
by: Mohamad, W.F., et al.
Published: (2020)

Ni-Cr based Self Lubricating Composites with the Different Solid Lubricants Produced through Powder Metallurgy Method
by: WAN FARHANA, MOHAMAD
Published: (2021)

Physical and Mechanical Properties of Ni-Cr based composites with addition of solid lubricants produced through powder metallurgy process
by: Ahmad, Faiz
Published: (2017)

Physical and Mechanical Properties of Ni-Cr based composites with addition of solid lubricants produced through powder metallurgy process
by: Wan Farhana, Mohamad, et al.
Published: (2016)

Sliding of general frictional complete contacts
by: S., Karuppanan, et al.
Published: (2008)

Sliding Friction of Steel Combinations
by: Nuruzzaman, D. M., et al.
Published: (2014)

Physical and Mechanical Properties of Ni-Cr based composites with addition of solid lubricants produced through powder metallurgy process
by: Mohamad, W.F., et al.
Published: (2016)

An overview of fluoride-based solid lubricants in sliding contacts
by: Mazumder, Subhrojyoti, et al.
Published: (2020)

Solid state sintering of Co-Cr-Mo (F 75): Microstructure and properties
by: Shamsul Baharin, Jamaludin, et al.
Published: (2011)

Frictional Characteristics of Steel Materials Sliding against Mild Steel
by: Nuruzzaman, D. M., et al.
Published: (2014)

Microwave sintering of Ni-Cr doped strontium hexaferrite synthesized via sol-gel method
by: Kanagesan, Samikannu, et al.
Published: (2014)

Influence of Normal Loads and Sliding Velocities on Friction Properties of Engineering Plastics Sliding against Rough Counterfaces
by: Nuruzzaman, D. M., et al.
Published: (2016)

The tribological and electrochemical behavior of HVOF-sprayed Cr3C2–NiCr ceramic coating on carbon steel
by: Zavareh, M.A., et al.
Published: (2015)

Characterization of Co-Cr-Mo (F-75) alloy produced by solid state sintering
by: Zuraidawani, Che Daud, et al.
Published: (2011)

Characterization of Co-Cr-Mo (F-75) alloy produced by solid state sintering
by: Zuraidawani, Che Daud, et al.
Published: (2010)

Friction Coefficient and Wear Rate of Copper and Aluminum Sliding against Mild Steel
by: Nuruzzaman, D. M., et al.
Published: (2012)

Frictional Behavior of Polymers Sliding Against Smooth and Rough Mild Steel Counter Faces
by: Nuruzzaman, D. M., et al.
Published: (2014)

Hybrid microwave sintering of Fe-Cr-Cu
by: Siti Syafiqah, Sakor
Published: (2021)

Hybrid microwave sintering of Fe-Cr-Mo
by: Nur Hidayah, Abu Bakar
Published: (2021)

Friction and lubrication effects in the machining of aluminium alloys
by: Liew, Willey Yun Hsien, et al.
Published: (1998)

The effect of lubrication in reducing net friction in warm powder compaction process
by: Nor S.S.M., et al.
Published: (2023)

Experimental Investigation on Friction Coefficient of Engineering Polymers Sliding Against Different Counterface Materials
by: Nuruzzaman, D. M., et al.
Published: (2014)

Experimental Investigation of Friction Coefficient and Wear Rate of Different Sliding Pairs
by: Chowdhury, M. A., et al.
Published: (2013)

Frictional Behavior of Bearing Material Under Gas Lubricated Conditions
by: Abdollah, Mohd Fadzli bin, et al.
Published: (2013)

Frictional behavior of bearing material under gas lubricated conditions
by: Abdollah, Mohd Fadzli bin, et al.
Published: (2014)

Noble electroless Ni-P deposited hexagonal boron nitride for effective solid lubricant application
by: Maleque, Md. Abdul, et al.
Published: (2014)

Hybrid microwave sintering of Fe-Cr-SiC
by: Khairul Nisak, Kamis
Published: (2021)

A new tribological approach for lubricated sliding contact of pitted metallic curvature cup
by: Razak, D. M., et al.
Published: (2016)

Sliding frictional contact between a square block and an elastically similar half-plane
by: Karuppanan , S, et al.
Published: (2008)

Durability and tribological properties of thermally sprayed wc cermet coating under lubricated rolling-sliding contact
by: Nuruzzaman, D. M., et al.
Published: (2007)

Dry sliding friction behaviour of ALCRN and tin coating
by: Mohd Azlan Ismail, et al.
Published: (2012)

Comparison studies on phase formation and transformation behavior between Ni-Ti and Ni-TiH2 synthesized via solid state sintering
by: Mohd Zaki, Hafizah Hanim, et al.
Published: (2018)

Improvement of the lubrication performance of RBD palm stearin as an alternative lubricant under different sliding speeds
by: Azman, Nurul Farhanah, et al.
Published: (2017)

Frictional behaviour of trimethylolpropane (TMP) oleate at different regimes of lubrication
by: Maarof, A. F., et al.
Published: (2019)

Formation of FeCrAl alloy by compacting at elevated temperature and sintering at different schedule
by: Muhammad Amir Afzam Awang
Published: (2024)

Friction and wear study of passenger car piston top ring sliding on cast iron material lubricated with palm fatty acid distillate (PFAD)
by: Abdul Hamid, Mohd. Kameil, et al.
Published: (2018)

Cr-Ni Alloy Electrodeposition and Comparison with Conventional Pure Cr Coating Technique
by: Moniruzzaman, M., et al.
Published: (2012)

Paraffinic mineral oil lubrication for cold forward extrusion: Effect of lubricant quantity and friction
by: Mohd Hafis, Sulaiman, et al.
Published: (2013)