High Q realization of quasi dual-mode dual band bandpass filter
This paper introduces a new design of dual-band bandpass filter based on coaxial line. The two passbands are achieved by connecting two stepped-impedance quasi-dual-mode resonators in parallel. Experimental prototype is fabricated and presented. The measured result shows that the coaxial filter has...
Saved in:
| Main Authors: | , , |
|---|---|
| 格式: | Article |
| 出版: |
Institute of Electrical and Electronics Engineers Inc.
2018
|
| 在线阅读: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85044781937&doi=10.1109%2fAPMC.2017.8251422&partnerID=40&md5=19af388f472f8371a4c42dfdc74189b9 http://eprints.utp.edu.my/21852/ |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | This paper introduces a new design of dual-band bandpass filter based on coaxial line. The two passbands are achieved by connecting two stepped-impedance quasi-dual-mode resonators in parallel. Experimental prototype is fabricated and presented. The measured result shows that the coaxial filter has two passbands at 773 MHz and 880 MHz with the bandwidth of 1 and 0.4 respectively. In addition, each band of the filter has two resonances by using only one coaxial resonator structure with the electrical length of 120° to achieve miniaturization. © 2017 IEEE. |
|---|