表紙画像

Optimisation of machining parameters using grey relation analysis for EDM with impulse flushing

The present work demonstrates the optimisation process of multiple responses, i.e., material removal rate (MRR) and tool wear rate (TWR) of electrical discharge machining (EDM) by grey Taguchi analysis. The work piece material was AISI P20 tool steel and a cylindrical copper electrode was used with...

保存先:

書誌詳細
主要な著者:	Dewangan, S., Biswas, C.K.
フォーマット:	論文
出版事項:	2013
オンライン･アクセス:	http://www.scopus.com/inward/record.url?eid=2-s2.0-84877761852&partnerID=40&md5=bbe52f06d4358b05d2054ff3bb8a51e0 http://eprints.utp.edu.my/10064/
タグ:	タグ追加タグなし, このレコードへの初めてのタグを付けませんか!

類似資料

Optimization of EDM Injection Flushing Type Control Parameters Using Grey Relational Analysis on AISI 304 Stainless Steel Workpiece
著者:: Mohamed Reza Zalani, Mohamed Suffian, 等
出版事項: (2010)

Study of surface integrity and dimensional accuracy in EDM using Fuzzy TOPSIS and sensitivity analysis
著者:: Dewangan, S., 等
出版事項: (2015)

Influence of different tool electrode materials on EDMed surface integrity of AISI P20 tool steel
著者:: Dewangan, S., 等
出版事項: (2014)

Influence of different tool electrode materials on EDMed surface integrity of AISI P20 tool steel
著者:: Dewangan, S., 等
出版事項: (2014)

Treatment of Grey Water for Toilet Flushing Use
著者:: Abd. Razi, Naizaitul Husna
出版事項: (2004)

Multi-response optimisation of EDM of AISI D2 tool steel using response surface methodology
著者:: Pradhan, M.K., 等
出版事項: (2011)

Effects of electrical discharge machining (EDM) jet flushing setting on the machining of tool steel workpiece
著者:: Hasan, Muda
出版事項: (2009)

Optimisation of surface integrity model using response surface methodology for EDMed AISI D2 tool steel
著者:: Pradhan, M.K., 等
出版事項: (2012)

Modeling and analysis of process parameters on Surface Roughness in EDM of AISI D2 tool steel by RSM approach
著者:: Pradhan, M.K., 等
出版事項: (2009)

Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece
著者:: Mohamed Reza Zalani, Mohamed Suffian, 等
出版事項: (2012)

Optimization Of Abrasive Waterjet Machining Process Parameters Using Orthoganalarray With Grey Relational Analysis
著者:: Azmir, Azhari, 等
出版事項: (2007)

FEM of residual stress of EDMed surfaces
著者:: Biswas, C.K., 等
出版事項: (2012)

FEM of residual stress of EDMed surfaces
著者:: Biswas, C.K., 等
出版事項: (2012)

Modeling and analysis of surface crack in EDMed AISI D2 steel
著者:: Pradhan, M.K., 等
出版事項: (2012)

Response surface analysis of EDMed surfaces of AISI D2 steel
著者:: Pradhan, M.K., 等
出版事項: (2011)

Effects of hole taper on high speed steel workpiece using EDM injection flushing
著者:: M. S., Reza, 等
出版事項: (2010)

Development of micro-EDM machine with process parameter control for EDM drilling
著者:: Wan Azhar, Wan Ahmad, 等
出版事項: (2021)

Effects of flushing on electro-discharge machined surface
著者:: Shamsul Shahril, Mat Yunus
出版事項: (2008)

Investigation on the effect of machining parameters in EDMing of titanium alloy
著者:: S. Sharif, Rival
出版事項: (2003)

Investigating the effect of machining parameters on EDMed components a RSM approach / Manoj Kumar Pradhan and Chandan Kumar Biswas
著者:: Pradhan, Manoj Kumar, 等
出版事項: (2010)

Influence of work and tool materials on parameters of electrical discharge machining(EDM)
著者:: Amin, A. K. M. Nurul, 等
出版事項: (2002)

Multi-response optimization and analysis of Al/B4Cp EDM using grey relational analysis / Mangesh Phate, Shraddha Toney and Vikas Phate
著者:: Phate, Mangesh, 等
出版事項: (2022)

Grey relational analysis feature selection for cancer classification using support vector machine
著者:: Sy. Ahmad Ubaidillah, Sharifah Hafizah
出版事項: (2014)

Grey relational analysis feature selection for cancer classification using support vector machine
著者:: Sy. Ahmad Ubaidillah, Sharifah Hafizah
出版事項: (2014)

Evaluating the electrical discharge machining (EDM) parameters with using carbon nanotubes
著者:: Sari, M. M., 等
出版事項: (2012)

First flush analysis in urban catchments
著者:: Alias, Noraliani
出版事項: (2013)

Hybrid grey relational analysis-support vector machine (GR-SVM) in predicting machining surface roughness
著者:: Mat Deris, Ashanira
出版事項: (2013)

An improvement in support vector machine classification model using grey relational analysis for cancer diagnosis
著者:: Sallehuddin, R., 等
出版事項: (2016)

Optimization of electrical discharge machine on mild steel AISI 1020 by using grey relational analysis
著者:: Abdul Rahim, Asas
出版事項: (2010)

Multiple objective optimization of electrical discharge machining on titanium alloy using grey relational analysis
著者:: Muhammad Aliff Nazreen, Norazmi
出版事項: (2012)

Effects of polarity parameter on the machining of tool steel workpiece using electric discharge machining (EDM)
著者:: Ahmad Fadzil, Mohamad
出版事項: (2009)

Influence of machining parameters on surface roughness during EDM of mild steel
著者:: Khan, Ahsan Ali, 等
出版事項: (2011)

Investigation of optimum EDM die sinking parameters in micro dimple machining
著者:: Lee, Jie Ying, 等
出版事項: (2022)

Investigation on parameters influence first flush occurrence in urban residential catchment
著者:: Alias, N., 等
出版事項: (2015)

Taguchi based grey relational analysis for multi-performance optimization of slab milling process parameters
著者:: Arshad, Noor Siddiquee, 等
出版事項: (2012)

Integration of taguchi-grey relational analysis technique in parameter process optimization for rice husk composite
著者:: Nor Mohamed, Sity Ainy, 等
出版事項: (2019)

Modeling of EDM Process parameters for Machining Stainless Steel using Copper Electrodes
著者:: Khan, Ahsan Ali, 等
出版事項: (2008)

Study on machining parameters optimization in EDM of tungsten carbide using the Taguchi method
著者:: Lajis, Mohd. Amri
出版事項: (2002)

Examination of Machining Parameters on the Surface Roughness of Stavax ESR Materials using EDM
著者:: Mebrahitom, A., 等
出版事項: (2014)

Multi-respone injection moulding process parameters optimization using Taguchi method with grey relational analysis
著者:: Mohd Ali, Noorfa Idayu
出版事項: (2018)