封面图片

Optimisation of machining parameters using grey relation analysis for EDM with impulse flushing

The present work demonstrates the optimisation process of multiple responses, i.e., material removal rate (MRR) and tool wear rate (TWR) of electrical discharge machining (EDM) by grey Taguchi analysis. The work piece material was AISI P20 tool steel and a cylindrical copper electrode was used with...

Saved in:

书目详细资料
Main Authors:	Dewangan, S., Biswas, C.K.
格式:	Article
出版:	2013
在线阅读:	http://www.scopus.com/inward/record.url?eid=2-s2.0-84877761852&partnerID=40&md5=bbe52f06d4358b05d2054ff3bb8a51e0 http://eprints.utp.edu.my/10064/
标签:	添加标签没有标签, 成为第一个标记此记录!

相似书籍

Optimization of EDM Injection Flushing Type Control Parameters Using Grey Relational Analysis on AISI 304 Stainless Steel Workpiece
由: Mohamed Reza Zalani, Mohamed Suffian, et al.
出版: (2010)

Study of surface integrity and dimensional accuracy in EDM using Fuzzy TOPSIS and sensitivity analysis
由: Dewangan, S., et al.
出版: (2015)

Influence of different tool electrode materials on EDMed surface integrity of AISI P20 tool steel
由: Dewangan, S., et al.
出版: (2014)

Influence of different tool electrode materials on EDMed surface integrity of AISI P20 tool steel
由: Dewangan, S., et al.
出版: (2014)

Treatment of Grey Water for Toilet Flushing Use
由: Abd. Razi, Naizaitul Husna
出版: (2004)

Multi-response optimisation of EDM of AISI D2 tool steel using response surface methodology
由: Pradhan, M.K., et al.
出版: (2011)

Effects of electrical discharge machining (EDM) jet flushing setting on the machining of tool steel workpiece
由: Hasan, Muda
出版: (2009)

Optimisation of surface integrity model using response surface methodology for EDMed AISI D2 tool steel
由: Pradhan, M.K., et al.
出版: (2012)

Modeling and analysis of process parameters on Surface Roughness in EDM of AISI D2 tool steel by RSM approach
由: Pradhan, M.K., et al.
出版: (2009)

Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece
由: Mohamed Reza Zalani, Mohamed Suffian, et al.
出版: (2012)

Optimization Of Abrasive Waterjet Machining Process Parameters Using Orthoganalarray With Grey Relational Analysis
由: Azmir, Azhari, et al.
出版: (2007)

FEM of residual stress of EDMed surfaces
由: Biswas, C.K., et al.
出版: (2012)

FEM of residual stress of EDMed surfaces
由: Biswas, C.K., et al.
出版: (2012)

Modeling and analysis of surface crack in EDMed AISI D2 steel
由: Pradhan, M.K., et al.
出版: (2012)

Response surface analysis of EDMed surfaces of AISI D2 steel
由: Pradhan, M.K., et al.
出版: (2011)

Effects of hole taper on high speed steel workpiece using EDM injection flushing
由: M. S., Reza, et al.
出版: (2010)

Development of micro-EDM machine with process parameter control for EDM drilling
由: Wan Azhar, Wan Ahmad, et al.
出版: (2021)

Effects of flushing on electro-discharge machined surface
由: Shamsul Shahril, Mat Yunus
出版: (2008)

Investigation on the effect of machining parameters in EDMing of titanium alloy
由: S. Sharif, Rival
出版: (2003)

Investigating the effect of machining parameters on EDMed components a RSM approach / Manoj Kumar Pradhan and Chandan Kumar Biswas
由: Pradhan, Manoj Kumar, et al.
出版: (2010)

Influence of work and tool materials on parameters of electrical discharge machining(EDM)
由: Amin, A. K. M. Nurul, et al.
出版: (2002)

Multi-response optimization and analysis of Al/B4Cp EDM using grey relational analysis / Mangesh Phate, Shraddha Toney and Vikas Phate
由: Phate, Mangesh, et al.
出版: (2022)

Grey relational analysis feature selection for cancer classification using support vector machine
由: Sy. Ahmad Ubaidillah, Sharifah Hafizah
出版: (2014)

Grey relational analysis feature selection for cancer classification using support vector machine
由: Sy. Ahmad Ubaidillah, Sharifah Hafizah
出版: (2014)

Evaluating the electrical discharge machining (EDM) parameters with using carbon nanotubes
由: Sari, M. M., et al.
出版: (2012)

First flush analysis in urban catchments
由: Alias, Noraliani
出版: (2013)

Hybrid grey relational analysis-support vector machine (GR-SVM) in predicting machining surface roughness
由: Mat Deris, Ashanira
出版: (2013)

An improvement in support vector machine classification model using grey relational analysis for cancer diagnosis
由: Sallehuddin, R., et al.
出版: (2016)

Optimization of electrical discharge machine on mild steel AISI 1020 by using grey relational analysis
由: Abdul Rahim, Asas
出版: (2010)

Multiple objective optimization of electrical discharge machining on titanium alloy using grey relational analysis
由: Muhammad Aliff Nazreen, Norazmi
出版: (2012)

Effects of polarity parameter on the machining of tool steel workpiece using electric discharge machining (EDM)
由: Ahmad Fadzil, Mohamad
出版: (2009)

Influence of machining parameters on surface roughness during EDM of mild steel
由: Khan, Ahsan Ali, et al.
出版: (2011)

Investigation of optimum EDM die sinking parameters in micro dimple machining
由: Lee, Jie Ying, et al.
出版: (2022)

Investigation on parameters influence first flush occurrence in urban residential catchment
由: Alias, N., et al.
出版: (2015)

Modeling of EDM Process parameters for Machining Stainless Steel using Copper Electrodes
由: Khan, Ahsan Ali, et al.
出版: (2008)

Study on machining parameters optimization in EDM of tungsten carbide using the Taguchi method
由: Lajis, Mohd. Amri
出版: (2002)

Examination of Machining Parameters on the Surface Roughness of Stavax ESR Materials using EDM
由: Mebrahitom, A., et al.
出版: (2014)

Taguchi based grey relational analysis for multi-performance optimization of slab milling process parameters
由: Arshad, Noor Siddiquee, et al.
出版: (2012)

Integration of taguchi-grey relational analysis technique in parameter process optimization for rice husk composite
由: Nor Mohamed, Sity Ainy, et al.
出版: (2019)

Multi-respone injection moulding process parameters optimization using Taguchi method with grey relational analysis
由: Mohd Ali, Noorfa Idayu
出版: (2018)