3D CFD study on hydrodynamics and mass transfer phenomena for SWM feed spacer with different floating characteristics

Enhancing the efficiency of reverse osmosis (RO) applications through the design and modification of spacer geometries for spiral wound membrane (SWM) modules remains a challenging task. In this work, four 3D feed spacer geometries with different degrees of “floating” characteristics are studied usi...

Full description

Saved in:
Bibliographic Details
Main Authors: Toh, K. Y., Liang, Y. Y., Lau, W. J., Fimbres Weihs, G. A.
Format: Article
Published: Institution of Chemical Engineers 2020
Subjects:
Online Access:http://eprints.utm.my/id/eprint/93926/
http://dx.doi.org/10.1016/j.cherd.2020.04.010
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Enhancing the efficiency of reverse osmosis (RO) applications through the design and modification of spacer geometries for spiral wound membrane (SWM) modules remains a challenging task. In this work, four 3D feed spacer geometries with different degrees of “floating” characteristics are studied using computational fluid dynamics (CFD) simulations to investigate the mechanisms that result in shear stress and mass transfer enhancement. The modelled data reveal that the floating ratio (Rf) is not a determining factor for mass transfer enhancement, as the transport mechanism is more strongly dependent on other geometric characteristics, such as a 2- or 3-layer design. The ?2 analysis confirms our hypothesis, as the middle filament in a 3-layer design disrupts the formation of the large streamwise vortex located downstream of the intersection between the top and bottom filaments at Reh 200. This explains why 3-layer spacers (both woven and non-woven) show lower Sherwood number (Sh) than a 2-layer woven (2LW) spacer at Reh 200. However, at a smaller Reh (<100), the vortical flow for 2LW is rather weak as a result of reduced membrane region with fluid mixing caused by creeping flow. This has led to the smaller Sh of 2LW compared to the 3-layer spacer.