صورة الغلاف

Characterization of arc for domestic electrical system

Undesired arcing in domestic electrical system can be caused by worn or broken insulator, loose connections, or static electricity. The arc heat energy is a fire hazard. In electrical equipment, an arc with enough energy can melt insulator or even cause fire. The present protection system in Malaysi...

وصف كامل

محفوظ في:
التفاصيل البيبلوغرافية
المؤلف الرئيسي: Wan Zainal Alam, Wan Noor Hishyam
التنسيق: أطروحة
اللغة:English
منشور في: 2020
الموضوعات:
TK Electrical engineering. Electronics Nuclear engineering
الوصول للمادة أونلاين:http://eprints.utm.my/id/eprint/93105/1/WanNoorHishyamMSKE2020.pdf
http://eprints.utm.my/id/eprint/93105/
http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:135857
الوسوم: إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
id my.utm.93105
record_format eprints
spelling my.utm.931052021-11-07T06:00:43Z http://eprints.utm.my/id/eprint/93105/ Characterization of arc for domestic electrical system Wan Zainal Alam, Wan Noor Hishyam TK Electrical engineering. Electronics Nuclear engineering Undesired arcing in domestic electrical system can be caused by worn or broken insulator, loose connections, or static electricity. The arc heat energy is a fire hazard. In electrical equipment, an arc with enough energy can melt insulator or even cause fire. The present protection system in Malaysia focus on short circuit and leakage current. The objective of the study is to characterize the arc voltage, current and frequency under various load types and short circuit. The arc through loads such as pure resistor, inductor, iron and fan is observed. Intentional arcs from a few appliances such as arc welding set is also included in this study to identify the difference from unintentional arcs. Present arc detection technique (through AFCI) includes the constant monitoring of voltage and current. Unintentional arc is identified when a few conditions are met through some signal processing. There are three types of arc which are series arc, parallel arc and live to ground arc. This study will measure the arc characteristics with different loads in series arc only because parallel arc will not affected by load then records of the current and voltage waveforms via a digital storage oscilloscope. As expected, with various load produce difference arc profile. This arc profile will further help the design of a low-cost arc detector so that it does not require signal processing. It will help increase the quality of the electrical protection system in Malaysia and reduce the cost of AFCI. 2020 Thesis NonPeerReviewed application/pdf en http://eprints.utm.my/id/eprint/93105/1/WanNoorHishyamMSKE2020.pdf Wan Zainal Alam, Wan Noor Hishyam (2020) Characterization of arc for domestic electrical system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering. http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:135857
institution Universiti Teknologi Malaysia
building UTM Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Malaysia
content_source UTM Institutional Repository
url_provider http://eprints.utm.my/
language English
topic TK Electrical engineering. Electronics Nuclear engineering
spellingShingle TK Electrical engineering. Electronics Nuclear engineering
Wan Zainal Alam, Wan Noor Hishyam
Characterization of arc for domestic electrical system
description Undesired arcing in domestic electrical system can be caused by worn or broken insulator, loose connections, or static electricity. The arc heat energy is a fire hazard. In electrical equipment, an arc with enough energy can melt insulator or even cause fire. The present protection system in Malaysia focus on short circuit and leakage current. The objective of the study is to characterize the arc voltage, current and frequency under various load types and short circuit. The arc through loads such as pure resistor, inductor, iron and fan is observed. Intentional arcs from a few appliances such as arc welding set is also included in this study to identify the difference from unintentional arcs. Present arc detection technique (through AFCI) includes the constant monitoring of voltage and current. Unintentional arc is identified when a few conditions are met through some signal processing. There are three types of arc which are series arc, parallel arc and live to ground arc. This study will measure the arc characteristics with different loads in series arc only because parallel arc will not affected by load then records of the current and voltage waveforms via a digital storage oscilloscope. As expected, with various load produce difference arc profile. This arc profile will further help the design of a low-cost arc detector so that it does not require signal processing. It will help increase the quality of the electrical protection system in Malaysia and reduce the cost of AFCI.
format Thesis
author Wan Zainal Alam, Wan Noor Hishyam
author_facet Wan Zainal Alam, Wan Noor Hishyam
author_sort Wan Zainal Alam, Wan Noor Hishyam
title Characterization of arc for domestic electrical system
title_short Characterization of arc for domestic electrical system
title_full Characterization of arc for domestic electrical system
title_fullStr Characterization of arc for domestic electrical system
title_full_unstemmed Characterization of arc for domestic electrical system
title_sort characterization of arc for domestic electrical system
publishDate 2020
url http://eprints.utm.my/id/eprint/93105/1/WanNoorHishyamMSKE2020.pdf
http://eprints.utm.my/id/eprint/93105/
http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:135857
_version_ 1717093420746407936
score 13.251813

مواد مشابهة