Correlation of uniaxial compressive strength between UCT and point load index of rock in Klang Valley

Uniaxial compressive strength (UCS) is one of the most important properties of rock that are widely used in geotechnical field. Since, the direct method to obtain UCS is expensive; Point Load Test (PLT) is the most commonly used method to estimate UCS. There are several general conversion factor sug...

詳細記述

保存先:
書誌詳細
第一著者: Moganakrisnan, Neesahantani
フォーマット: 学位論文
言語:English
出版事項: 2020
主題:
オンライン・アクセス:http://eprints.utm.my/id/eprint/86083/1/NeesahantaniMoganakrishnanMSKA2020.pdf
http://eprints.utm.my/id/eprint/86083/
http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:134210
タグ: タグ追加
タグなし, このレコードへの初めてのタグを付けませんか!
id my.utm.86083
record_format eprints
spelling my.utm.860832020-08-30T08:56:00Z http://eprints.utm.my/id/eprint/86083/ Correlation of uniaxial compressive strength between UCT and point load index of rock in Klang Valley Moganakrisnan, Neesahantani TA Engineering (General). Civil engineering (General) Uniaxial compressive strength (UCS) is one of the most important properties of rock that are widely used in geotechnical field. Since, the direct method to obtain UCS is expensive; Point Load Test (PLT) is the most commonly used method to estimate UCS. There are several general conversion factor suggested such as by the ISRM. However, it is found that index-to-strength study is rock dependent and site specific. This research presents on the correlation of UCS between Uniaxial Compressive Test (UCT) and PLT in Klang Valley based on location and rock type. UCT and PLT were conducted on a total of 40 sets of Limestone and 45 sets of Granite rock. The correlation equation for each location are; UCS = 21.192 Is(50) + 4.1976 for Serdang Lama, UCS = 5.7239 Is(50) + 73.819 for Wangsa Maju, UCS = 13.326 Is(50) + 46.24 for Jalan Kepong, UCS = 8.1125 Is(50) + 12.344 for Cochrane, UCS = 1.7789 Is(50) + 39.112 for Jalan Stonor, UCS = 12.151 Is(50) + 19.04 for Bandar Malaysia South, UCS = 18.921 Is(50) – 0.7189 for Sungai Long, UCS = 3.9971 Is(50) + 21.322 for Balakong, UCS = 6.618 Is(50) + 19.938 for Sector C, Parkcity and UCS = 33.708 Is(50) - 43.029 for USJ 7, Subang Jaya.In addition, a regional map of correlation equation is produced for future references in obtaining the UCS from the PLT. 2020 Thesis NonPeerReviewed application/pdf en http://eprints.utm.my/id/eprint/86083/1/NeesahantaniMoganakrishnanMSKA2020.pdf Moganakrisnan, Neesahantani (2020) Correlation of uniaxial compressive strength between UCT and point load index of rock in Klang Valley. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering. http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:134210
institution Universiti Teknologi Malaysia
building UTM Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Malaysia
content_source UTM Institutional Repository
url_provider http://eprints.utm.my/
language English
topic TA Engineering (General). Civil engineering (General)
spellingShingle TA Engineering (General). Civil engineering (General)
Moganakrisnan, Neesahantani
Correlation of uniaxial compressive strength between UCT and point load index of rock in Klang Valley
description Uniaxial compressive strength (UCS) is one of the most important properties of rock that are widely used in geotechnical field. Since, the direct method to obtain UCS is expensive; Point Load Test (PLT) is the most commonly used method to estimate UCS. There are several general conversion factor suggested such as by the ISRM. However, it is found that index-to-strength study is rock dependent and site specific. This research presents on the correlation of UCS between Uniaxial Compressive Test (UCT) and PLT in Klang Valley based on location and rock type. UCT and PLT were conducted on a total of 40 sets of Limestone and 45 sets of Granite rock. The correlation equation for each location are; UCS = 21.192 Is(50) + 4.1976 for Serdang Lama, UCS = 5.7239 Is(50) + 73.819 for Wangsa Maju, UCS = 13.326 Is(50) + 46.24 for Jalan Kepong, UCS = 8.1125 Is(50) + 12.344 for Cochrane, UCS = 1.7789 Is(50) + 39.112 for Jalan Stonor, UCS = 12.151 Is(50) + 19.04 for Bandar Malaysia South, UCS = 18.921 Is(50) – 0.7189 for Sungai Long, UCS = 3.9971 Is(50) + 21.322 for Balakong, UCS = 6.618 Is(50) + 19.938 for Sector C, Parkcity and UCS = 33.708 Is(50) - 43.029 for USJ 7, Subang Jaya.In addition, a regional map of correlation equation is produced for future references in obtaining the UCS from the PLT.
format Thesis
author Moganakrisnan, Neesahantani
author_facet Moganakrisnan, Neesahantani
author_sort Moganakrisnan, Neesahantani
title Correlation of uniaxial compressive strength between UCT and point load index of rock in Klang Valley
title_short Correlation of uniaxial compressive strength between UCT and point load index of rock in Klang Valley
title_full Correlation of uniaxial compressive strength between UCT and point load index of rock in Klang Valley
title_fullStr Correlation of uniaxial compressive strength between UCT and point load index of rock in Klang Valley
title_full_unstemmed Correlation of uniaxial compressive strength between UCT and point load index of rock in Klang Valley
title_sort correlation of uniaxial compressive strength between uct and point load index of rock in klang valley
publishDate 2020
url http://eprints.utm.my/id/eprint/86083/1/NeesahantaniMoganakrishnanMSKA2020.pdf
http://eprints.utm.my/id/eprint/86083/
http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:134210
_version_ 1677781128063221760
score 13.251813