Investigation of tribological properties of CuO/palm oil nanolubricant using pin-on-disc tribotester
It has been proposed that nanoparticles have the ability to enhance the tribological properties of lubricants. In the present research, the tribological properties of a palm-oil-based nanolubricant with copper (II) oxide (CuO) nanoparticles have been investigated experimentally using a pin-on-disc t...
محفوظ في:
المؤلفون الرئيسيون: | , , |
---|---|
التنسيق: | مقال |
اللغة: | English |
منشور في: |
ICE Publishing
2018
|
الموضوعات: | |
الوصول للمادة أونلاين: | http://eprints.utm.my/id/eprint/85422/1/NurulFarhanahAzman2018_InvestigationofTribologicalPropertiesofCuO.pdf http://eprints.utm.my/id/eprint/85422/ http://dx.doi.org/10.1680/jgrma.17.00026 |
الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
الملخص: | It has been proposed that nanoparticles have the ability to enhance the tribological properties of lubricants. In the present research, the tribological properties of a palm-oil-based nanolubricant with copper (II) oxide (CuO) nanoparticles have been investigated experimentally using a pin-on-disc tribotester. The experiments were conducted at a sliding speed of 0·2m/s and an applied load of 9·8 N, which corresponds to a contact pressure of 0·93GPa for 60min duration. Commercial mineral oil (SAE40) was used for comparison purposes. The results show that the tribological properties of the palm-oilbased lubricant were improved with the presence of copper (II) oxide nanoparticles, showing huge reductions in coefficient of friction and wear scar diameter of about 56 and 48%, respectively. The findings revealed that the presence of copper (II) oxide in palm kernel oil (PKO) reduced the roughness of the pin surface by 43·7%. The results also show that the tribological properties of the copper (II) oxide/palm-oil-based nanolubricant were comparable to those of SAE40. |
---|