Fabrication of CuW electrode for producing micro-hole on WC-Co using EDM process
Micro-machining is one of the fundamental technologies for manufacturing miniaturized parts and products with size of between 1 to 999 μm. A micro-mold cavity is required for the mass production of micro component using injection molding machine. Moreover, micro-holes are also required in a micro-di...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2013
|
| Subjects: | |
| Online Access: | http://eprints.utm.my/id/eprint/78258/1/MehdiHourmandMFKM20131.pdf http://eprints.utm.my/id/eprint/78258/ http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:79465 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Micro-machining is one of the fundamental technologies for manufacturing miniaturized parts and products with size of between 1 to 999 μm. A micro-mold cavity is required for the mass production of micro component using injection molding machine. Moreover, micro-holes are also required in a micro-die. Nowadays, WC and its composite (WC-Co) are the widely used material in the making of cutting tools, dies and other special tools and components. Therefore, machining of WC is an important activity in manufacturing. Micro-EDM is one of the most effective methods for machining WC. Unfortunately there is limited information available about fabricating micro-hole electrode made from CuW for electrical discharge machining. This includes information on suitable electrode material for electrical discharge machining of CuW, the processing method and suitable parameter for micro-EDM of CuW and WC-Co. In this research, PGM WHITE 3 is used as the dielectric fluid, Cu-W as the micro-electrode, WC-Co as the workpiece material and Sodik AG40L as the die-sinking machine selected for the project. Process parameters investigated are polarity and voltage while the effects investigated are time of machining, end wear and diameter of hole. An electrode with a diameter of 372.76 μm has been successfully fabricated using selected process. Results of the experiment show that Micro-electrode with negative polarity has lower end wear of tool than positive polarity. Negative polarity of micro-electrode is used for micro-EDM of hole and positive polarity of micro-electrode is used for facing of micro-electrode. Lowest end wear of electrode has been achieved at P of CuW (-), IP (0.4 A), ton (1 μs), Df (0.5), Sr (20 rpm), Eg (50). Lowest hole diameter has been achieved at P of CuW (+), IP (0.4 A), ton (1 μs), Df (0.5), Sr (20 rpm), Eg (70). The shortest time of machining is achieved at P of CuW (-), IP (0.4 A), ton (1 μs), Df (0.5), Sr (20 rpm) Eg (70) when investigating 50, 70 and 90V. |
|---|