封面圖片

Development of new fabrication and measurement techniques of micro-electrodes with high aspect ratio for micro EDM using typical EDM machine

Micro-electrodes are used for micro holes EDM drilling in miniaturized products. This study represents novel fabricating and measuring processes of high aspect ratio micro-electrodes based on horizontal moving block electrical discharge grinding (horizontal moving BEDG [HM-BEDG]) and gage block with...

Saved in:

書目詳細資料
Main Authors:	Hourmand, M., Sarhan, A. A. D., Noordin, M. Y.
格式:	Article
出版:	Elsevier B.V. 2017
主題:	TJ Mechanical engineering and machinery
在線閱讀:	http://eprints.utm.my/id/eprint/76948/ https://www.scopus.com/inward/record.uri?eid=2-s2.0-84996843169&doi=10.1016%2fj.measurement.2016.11.020&partnerID=40&md5=44765c21d8f356bdbbcb0ce2caa1d817
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Fabrication of high aspect ratio micro electrode by using EDM
由: Elsiti, N.M., et al.
出版: (2016)

Fabrication of high aspect ratio micro electrode by using EDM
由: Elsiti, Nagwa Mejid, et al.
出版: (2016)

Micro-EDM drilling of tungsten carbide using microelectrode with high aspect ratio to improve MRR, EWR, and hole quality
由: Hourmand, M., et al.
出版: (2016)

Fabrication of CuW electrode for producing micro-hold on Wc-Co using EDM process
由: Hourmand, Mehdi
出版: (2013)

Fabrication of CuW electrode for producing micro-hole on WC-Co using EDM process
由: Hourmand, Mehdi
出版: (2013)

High aspect ratio micro-EDM drilling with nano surface finish
由: Ali , Mohammad Yeakub, et al.
出版: (2016)

Development of micro-EDM machine with process parameter control for EDM drilling
由: Wan Azhar, Wan Ahmad, et al.
出版: (2021)

Optimization of EDM parameters for micro/meso fabrication
由: Ali, Mohammad Yeakub, et al.
出版: (2006)

Development of localised electrochemical deposition control system for fabricating micro EDM electrode
由: Habib, Mohammad Ahsan, et al.
出版: (2017)

Near net shape machining by Micro-EDM and Micro-WEDM
由: Saleh, Tanveer, et al.
出版: (2019)

Design and fabrication of micro swiss-roll combustor mold by micro EDM milling
由: Ali, Mohammad Yeakub, et al.
出版: (2007)

Micro-edm for micro-channel fabrication on nonconductive ZrO2 ceramic
由: Sabur, Abdus, et al.
出版: (2014)

Influence of electrode cooling on recast layers and micro crack in EDM of titanium
由: Abdulkareem, Suleiman, et al.
出版: (2011)

The Enhancement of Die Sink EDM Machining Efficiency Incorporating Micro-Flakes of Graphite Powder
由: Marashi, Houriyeh, et al.
出版: (2024)

Micro-Edm:Overview And Recent Developments
由: Mahendran, Samykano
出版: (2010)

Investigation of micromachining of silicon using micro-EDM
由: Samykano, M., et al.
出版: (2011)

Geometrical integrity of microholes produced by micro-EDM
由: Ali, Mohammad Yeakub
出版: (2008)

Research and Analysis of a Micro EDM System
由: Sundraj, Suthan Aravinthan
出版: (2009)

Development of micro-EDM with microactuator feed control system
由: Samykano, M., et al.
出版: (2011)

Powder mixed micro electro discharge machining (PMμEDM)
由: Ali, Mohammad Yeakub
出版: (2011)

Exploration of EDM assisted CNT in micro machining using statistical approach
由: Al Hazza, Muataz Hazza Faizi, et al.
出版: (2016)

Exploration of EDM assisted CNT in micro machining using statistical approach
由: Al Hazza, Muataz Hazza Faizi, et al.
出版: (2015)

Investigation of optimum EDM die sinking parameters in micro dimple machining
由: Lee, Jie Ying, et al.
出版: (2022)

Feasibility of double-layer microchannel fabrication at low speed micro end-mill and wire-cut EDM machines
由: Seder, Islam M.F., et al.
出版: (2014)

Fabrication of deep micro-holes in reaction-bonded SiC by ultrasonic cavitation assisted micro-EDM
由: Liew , Pay Jun, et al.
出版: (2014)

Review of improvements in wire electrode properties for longer working time and utilization in wire EDM machining
由: Maher, I., et al.
出版: (2015)

Development of a new cost performance index (CPI) for selecting the most suitable wire electrode in Wire-EDM machining
由: Sarhan, Ahmed A. D., et al.
出版: (2021)

Feasibility of double-layer microchannel fabrication at low speed micro end-mill and wire-cut EDM machines
由: Ahmed, Mirghani Ishag, et al.
出版: (2014)

Design and development of micro EDM using micro actuator tool feed system
由: Thinesh Chander, Sawalingam
出版: (2010)

Fundamental research with respect to thermal phenomena of micro EDM
由: Mohd Zahiruddin, Md. Zain
出版: (2016)

Investigation of taper angle in dry micro wire EDM
由: Ali, Mohammad Yeakub, et al.
出版: (2018)

ANN-based ensemble model for predicting micro-EDM responses and machining variability
由: Hasan, Mohammad Mainul, et al.
出版: (2025)

Formation of micro-cracks and recast layer during EDM of mild steel using copper electrodes
由: Khan, Ahsan Ali, et al.
出版: (2011)

Conceptualization of a hybrid machine combining Laser Beam Micro Machining (LBMM) and Micro Electrical Discharge Machining (Micro-EDM) in a single setup
由: Wan Azhar, Wan Ahmad, et al.
出版: (2024)

Investigation of micromachining of silicon using micro-EDM = penyelidikan dalam pemesinan mikro bagi silicon menggunakan EDM mikro
由: Mahendran, Samykano, et al.
出版: (2011)

Wear ratio and work surface finish during electrical discharge machining (EDM) with eccentric electrode
由: Khan, Ahsan Ali, et al.
出版: (2011)

Study of using three dimensional printer for EDM electrode fabrication
由: Hassan, Noor Haslyena
出版: (2011)

Laser-microEDM based hybrid micromachining: microdrilling and micromilliling
由: Saleh, Tanveer, et al.
出版: (2024)

Optimization of micro EDM drilling process using Taguchi method
由: Yazid, Yahya
出版: (2009)

Relationship between electrode size and machined surface in the EDM machining process
由: Mohd Azrul Aminur, Ismail
出版: (2008)