Fabrication of Fe2O3 nanoflakes-based electrochemical solar cells prepared by facile thermal oxidation
A Fe2O3 nanoflakes-based solar cell was successfully prepared by thermal oxidation of iron film on FTO glass. The short circuit current density (Jsc) of the cell increased with annealing time while the open circuit voltage was saturated after 1 h. This enhancement was caused by the increased surface...
Saved in:
Main Authors: | Rashid, N. M., Kishi, N., Soga, T. |
---|---|
Format: | Article |
Published: |
World Scientific Publishing Co. Pte Ltd
2016
|
Subjects: | |
Online Access: | http://eprints.utm.my/id/eprint/72421/ https://www.scopus.com/inward/record.uri?eid=2-s2.0-84973889528&doi=10.1142%2fS021798491650192X&partnerID=40&md5=249abe08ead171b8edfb51a75b54f04f |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Synthesis of iron oxide nanoflakes at lower temperature by air oxidation of iron foils
by: Mohamed Rashid, Norhana, et al.
Published: (2014) -
Effect of pre-annealing temperature on the growth of aligned a -Fe2O3 nanowires via a two-step thermal oxidation
by: Rashid, N. M., et al.
Published: (2016) -
Effects of nanostructures on iron oxide based dye sensitized solar cells fabricated on iron foils
by: Mohamed Rashid, Norhana, et al.
Published: (2016) -
Effect of pre-annealing temperature on the growth of aligned α-Fe2o3 nanowires via a two-step thermal oxidation
by: Mohamed Rashid, Norhana, et al.
Published: (2016) -
Effects of reduction temperature on copper nanowires growth by thermal reduction of copper oxide nanowires
by: Rashid, N. M., et al.
Published: (2016)