Real-time frequency estimation of complex gmsk signal of green communications devices
Parameter estimation of signals of universal software radio peripheral (USRP) devices is crucial to solve the problem of phase offsets of received signals in distributed beamforming. For systems that will utilize the closed loop feedback algorithm where the receiver needs to send the received signal...
Saved in:
| Main Authors: | , , , , , |
|---|---|
| Format: | Article |
| Published: |
University of Electronic Science and Technology of China
2016
|
| Subjects: | |
| Online Access: | http://eprints.utm.my/id/eprint/68152/ http://www.journal.uestc.edu.cn/index.php?p=archive&year=2016&volume=14&issue=2&action=list |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Parameter estimation of signals of universal software radio peripheral (USRP) devices is crucial to solve the problem of phase offsets of received signals in distributed beamforming. For systems that will utilize the closed loop feedback algorithm where the receiver needs to send the received signal strength (RSS) values periodically to the beamforming node so as to take advantage of energy conservation, the frequency and phase of these signals should be estimated before smoothening by nonlinear filters. This article presents the estimation of the frequency offsets of a Gaussian minimum shift keying (GMSK) signal from N210 USRP devices in real time by using the Radix-2 fast Fourier transform (FFT) algorithm in GNURadio. For these green communications devices, most of the needed hardware parts have been software defined, thereby reducing the supposed energy consumption. The frequency offsets from reference carrier frequencies of 900 MHz and 2.4 GHz are less than 3 kHz each before the estimation, but the average offsets are 45 Hz and 100 Hz after the estimation, respectively. The high offset value experienced with the 2.4 GHz carrier was due to consistent interference from devices on that same frequency. |
|---|