The influence of experimental silane primers on dentin bond strength and morphology: a laboratory and finite element analysis study
Statement of problem. The inconsistency of dentin bonding affects retention and microleakage. Purpose. The purpose of this laboratory and finite element analysis study was to investigate the effects on the formation of a hybrid layer of an experimental silane coupling agent containing primer solutio...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Published: |
Mosby Inc.
2014
|
| Subjects: | |
| Online Access: | http://eprints.utm.my/id/eprint/62963/ http://dx.doi.org/10.1016/j.prosdent.2014.05.011 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Statement of problem. The inconsistency of dentin bonding affects retention and microleakage. Purpose. The purpose of this laboratory and finite element analysis study was to investigate the effects on the formation of a hybrid layer of an experimental silane coupling agent containing primer solutions composed of different percentages of hydroxyethyl methacrylate. Material and methods. A total of 125 sound human premolars were restored in vitro. Simple class I cavities were formed on each tooth, followed by the application of different compositions of experimental silane primers (0%, 5%, 25%, and 50% of hydroxyethyl methacrylate), bonding agents, and dental composite resins. Bond strength tests and scanning electron microscopy analyses were performed. The laboratory experimental results were validated with finite element analysis to determine the pattern of stress distribution. Simulations were conducted by placing the restorative composite resin in a premolar tooth by imitating simple class I cavities. The laboratory and finite element analysis data were significantly different from each other, as determined by 1-way ANOVA. A post hoc analysis was conducted on the bond strength data to further clarify the effects of silane primers. Results. The strongest bond of hybrid layer (16.96 MPa) was found in the primer with 25% hydroxyethyl methacrylate, suggesting a barely visible hybrid layer barrier. The control specimens without the application of the primer and the primer specimens with no hydroxyethyl methacrylate exhibited the lowest strength values (8.30 MPa and 11.78 MPa) with intermittent and low visibility of the hybrid layer. These results were supported by finite element analysis that suggested an evenly distributed stress on the model with 25% hydroxyethyl methacrylate. Conclusions. Different compositions of experimental silane primers affected the formation of the hybrid layer and its resulting bond strength. |
|---|