Synthesis and characterization of chitosan grafted with polystyrene using ammonium persulfate initiator
Graft copolymerization of styrene from chitosan was prepared under various conditions using ammonium persulfate (APS) initiator. The grafting was found to be best at 1:3 chitosan:styrene weight ratio, 0.4 g APS and temperature 60 degrees C. The washed products were characterized by spectroscopic and...
Saved in:
| Main Authors: | , , |
|---|---|
| 格式: | Article |
| 出版: |
Elsevier
2014
|
| 主題: | |
| 在線閱讀: | http://eprints.utm.my/id/eprint/62767/ https://doi.org/10.1016/j.matlet.2014.03.007 |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | Graft copolymerization of styrene from chitosan was prepared under various conditions using ammonium persulfate (APS) initiator. The grafting was found to be best at 1:3 chitosan:styrene weight ratio, 0.4 g APS and temperature 60 degrees C. The washed products were characterized by spectroscopic and thermal methods. FT-IR analysis indicate the presence of polystyrene peaks, DSC analysis showed the improvement in Tg of the polystyrene. After acid hydrolysis, the copolymer was analyzed using gel permeation chromatography (GPC), and the result revealed the isolated polystyrene having M-w and M-n, as 95,249 and 30,755 respectively, with polydispersity index, 2.92. |
|---|