Influence of cutting conditions on chip formation when turning assab DF-3 hardened tool steel
Machining investigations were made on ASSAB DF-3 oil hardened tool steel HRC 45 using wiper coated ceramic tool. Both cutting speed and feed rates were purposely and continually changed to enable investigations performed at various cutting combination. Both cutting speed and feedrate were found to i...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Published: |
2013
|
| Subjects: | |
| Online Access: | http://eprints.utm.my/id/eprint/47885/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|