Cover Image

Development of an apparatus for the measurement of thermal conductivity of building materials

Saved in:

Bibliographic Details
Main Author:	Kamsah, Nazri
Format:	Thesis
Published:	1988
Subjects:	TH Building construction
Online Access:	http://eprints.utm.my/id/eprint/42270/
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Achieving Pakis’s thermal conductivity as architectural building thermal resistant by guarded steady-state hotbox method: part 1
by: Mintorogo, Danny Santoso, et al.
Published: (2011)

Towards developing building services standard method of measurement in Malaysia
by: Amuda Yusuf, Ganiyu, et al.
Published: (2013)

Towards developing building services standard method of measurement in Malaysia
by: Amuda Yusuf, Ganiyu, et al.
Published: (2014)

The effect of metakaolin in production of low thermal conductivity cement sand brick
by: Deraman, Rafikullah, et al.
Published: (2021)

Measure of damages for defective building work
by: Wong, Bi Xia
Published: (2009)

Indoor thermal condition of factory building in Bangladesh
by: Al Sayem Khan, Muhammed Abdullah, et al.
Published: (2011)

Materials takeoff in building information modeling
by: Muhammad Syaiful Safwan , Nordin
Published: (2015)

Building material increased price by 10 percent
by: Nanyang Siang Pau, (Northern)
Published: (2011)

The major factors influencing the selection of building materials for sustainable buildings in Malaysia according to green building index (GBI)
by: Law, Geok Kian
Published: (2011)

Effects of envelope color and heat insulation on building thermal performance
by: Abdullah, Ikmalzatul
Published: (2013)

Signal Penetration towards Wooden Building Construction Materials
by: Kho, L.C., et al.
Published: (2007)

The Use of Green Building Materials in The Construction Industry In Malaysia
by: Lim, Siao Vern
Published: (2011)

Evaluation of thermal and solar performance in atrium buildings using sequential simulation
by: Ab Ghafar, Norafida, et al.
Published: (2019)

Thermal performance of vertical shafts in buildings: an overview of efficient design parameters
by: Abdul Majid, Roshida, et al.
Published: (2022)

Development of a building energy analysis package (BEAP) and its application to the analysis of cool thermal energy storage systems
by: Senawi, Mohd. Yusoff
Published: (1999)

EPS RHA concrete bricks - A new building material
by: Ling,, I. H, et al.
Published: (2013)

Building a small concrete house (materials and manpower costing)
by: Tan, Siew Yea
Published: (2002)

Essential features of a building services standard method of measurement in Malaysia
by: Amuda-Yusuf, Ganiyu, et al.
Published: (2015)

Measures for mitigating the delay in high-rise building construction projects in Dubai
by: Bhatti, Imtiaz Ali
Published: (2019)

Thermal behaviour of residential buildings in South-East Asia through dynamic simulation
by: Rilling, Dirk, et al.
Published: (2006)

The effect of balcony on thermal performance of high rise office building in tropical climate
by: Ayokunle, Omoyola Tolulope
Published: (2015)

BIM-based retrofit method (RBIM) for building envelope thermal performance optimization
by: Seghier, Taki Eddine, et al.
Published: (2022)

Selection of the industrialized building material supplier by analytic hierarchy process method
by: Moravveji, Mohammad Yousef
Published: (2013)

Integration of building information modelling (BIM) with materials management in construction project
by: Fayed Mogalli, Ali Hussein
Published: (2017)

Adaptive reuse of historical buildings: Service quality measurement of Kuala Lumpur museums
by: Ali, Zuraini Md, et al.
Published: (2019)

Mitigation measures for critical factors causing cost overrun in Malaysian building projects
by: Ullah, Kaleem
Published: (2018)

Critical Factors and Mitigating Measures of Construction Delays of Pakistani Building Construction Projects
by: Irfanullah, Irfanullah, et al.
Published: (2023)

Evaluating the Material Waste Reduction by Using Prefabrication in Building Construction in Kuala Lumpur
by: Nurul Aini, Osman, et al.
Published: (2016)

Software development for building energy analysis
by: Senawi, Mohd. Yusoff
Published: (1992)

Training and development of building surveyors in Malaysia
by: Ali, A.S., et al.
Published: (2012)

Facilities management of intelligent building : developing an application model in the management of intelligent building
by: Chua, Huwi Huwi
Published: (2001)

The effect of long term exposure on thermal performance of roofing materials in Malaysian climatic condition
by: Lesado, Makama
Published: (2012)

Investigating thermal comfort of abandoned low cost houses in Sarawak based on construction materials
by: Ayagi, Kabiru Musa
Published: (2012)

Teaching engineering ethics: a necessary measure for engineering capacity building in Arab countries
by: Mahmoud Nasef, Mohamed, et al.
Published: (2010)

Application of CFD in prediction of indoor building thermal performance as an effective pre-design tool towards sustainability
by: Chung, Leng Pau, et al.
Published: (2014)

Analysis of Micro-Morphology, Thermal Conductivity, Thermal Diffusivity and Specific Heat Capacity of Coconut Fibre Reinforced Foamed Concrete
by: Othuman Mydin, M.A., et al.
Published: (2014)

Environmental Impact Of Predominant Building Materials Of Mosques In Mosul, Iraq From 1100s To 1800s Ad
by: Yahya, Hafedh Abed
Published: (2015)

The effect of green roof technology and conventional zing roof to different building materials in tropical climate
by: Khor, Jo Anne
Published: (2010)

The effect of green roof technology and conventional zinc roof to different building materials in tropical climate
by: Khor, J.A
Published: (2010)

Computerized simulation of automotive air-conditioning system: a parametric study
by: Mohamed Kamar, Haslinda, et al.
Published: (2013)