Finite element modeling of composite plates with total imperfect interface subjected to impact loading

This project report is devoted to the modeling of the impact behavior of laminated composite plates, with a special emphasis on incorporating interfacial imperfection. In most analytical and numerical works on composite materials, a perfect interface between adjacent laminae is assumed which implies...

Saved in:

書目詳細資料
主要作者:	Ibrahim, Mohamud Abdirahman
格式:	Thesis
語言:	English
出版:	2013
主題:	TA Engineering (General). Civil engineering (General)
在線閱讀:	http://eprints.utm.my/id/eprint/41846/5/MohamudAbdirahmanIbrahimMFKA2013.pdf http://eprints.utm.my/id/eprint/41846/
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Finite element modeling of laminated composite plates with locally delaminated interface subjected to impact loading
由: Abo Sabah, Saddam Hussein Ali
出版: (2013)

Finite element modeling of laminated composite plates with locally delaminated interface subjected to impact loading
由: Abo Sabah, Saddam Hussein, et al.
出版: (2014)

Finite element to predict damage of a polycarbonate armor plate subjected to impact
由: Shah, Qasim Hussain, et al.
出版: (2011)

PARAMETRIC STUDY OF REINFORCED CONCRETE BEAM SUBJECTED TO IMPACT LOADING USING FINITE ELEMENT ANALYSIS
由: Lieng , Kee Wong
出版: (2016)

Finite element analysis of end-plate connection under seismic loading
由: Fong, Khai Yeh
出版: (2012)

Finite Element Analysis on Reinforced Concrete Beams Subject to Impact
由: Hui, Ng Seh
出版: (2015)

Experimental observation of Jute/Epoxy composite plate subjected to impact loading
由: Omar, Nurihan, et al.
出版: (2011)

Instability and sensitivity to imperfection of conical shell subjected to axial compression
由: Mahidan, Fairuz Mardhiah
出版: (2021)

Finite element based fatigue crack growth of cracked plates under axial loading
由: Mohamad Abiddullah, Mohd Lasim
出版: (2010)

STRESS ANALYSIS OF STEEL PLATE WITH RECTANGULAR HOLES SUBJECTED TO AXIAL STRESS USING FINITE ELEMENT METHOD
由: Mazli, Arwie Amri
出版: (2021)

Experimental study on jute-fiber-epoxy composite plate subjected to impact loading
由: Omar, Nurihan, et al.
出版: (2012)

Finite element formulation of piezoelectric laminated composite plate
由: Mahmood, Iskandar Al-Thani, et al.
出版: (2011)

Mechanical behaviour of in-situ chondrocytes subjected to different loading rates: a finite element study
由: Moo, E.K., et al.
出版: (2012)

Finite Element Analysis Of Composite Ballistics Helmet Subjected To High Velocity Impact.
由: Othman, Rozaini
出版: (2009)

Finite element study of composite cones under axial compression loading
由: Khalid, Asad A., et al.
出版: (2011)

Finite element prediction of the axial load test on the profiled composite panel
由: Chong, Pei Shan
出版: (2010)

Finite element analysis of axially loaded pierced profiled composite panel
由: Lim, See Chaw
出版: (2010)

Finite element modelling of interface shear strength at concrete-to-concrete bond
由: Mohamad, Mazizah Ezdiani, et al.
出版: (2015)

Finite element simulation of reinforced concrete slabs under impact loading
由: Mokhatar , Shahrul Niza
出版: (2009)

Buckling and post buckling improvements of laminated composite plates using finite element method
由: A. Rasid, Zainudin, et al.
出版: (2011)

Finite element analysis of high modal dynamic responses of a composite floor subjected to human motion under passive live load
由: Behni, Arash, et al.
出版: (2013)

Dynamic & Static Finite Element Analysis of Non=Uniform Cross-Section Functionally Graded Composite Beam Subjected to Thermo-Mechanical Loading
由: Mathews, John George Mathews
出版: (2018)

Development of finite element formulation for plate buckling structure
由: Algaifi, Hassan Amer Ali
出版: (2013)

The response of steel plates subjected to close-in blast loads
由: N. S. A., Razak, et al.
出版: (2021)

Finite element simulation of reinforced concrete slabs under impact loading
由: Mokhatar, Shahrul Niza
出版: (2009)

Predicting Failures for Repairable System Subjected to Imperfect Maintenance
由: Nurul Akma Binti Brahim, Nurul Akma
出版: (2009)

Finite element modeling and updating of the composite plate structure
由: R. M., Yaacob, et al.
出版: (2019)

Thermal buckling and post-buckling improvements of laminated composite plates using finite element method
由: A. Rasid, Zainudin, et al.
出版: (2011)

Finite element analysis of rc beams with bamboo fiber reinforced composite plate using ABAQUS
由: Yip, Wai Kit
出版: (2017)

Buckling analysis of plate girder with trapezoid web subjected to shear loading
由: Ibrahim, Izni Syahrizal, et al.
出版: (2008)

Vulnerability of public buildings subjected to earthquake by finite element modelling
由: Adnan, Azlan, et al.
出版: (2006)

Finite element analysis of a composite crash box subjected to low velocity impact
由: Shaik Dawood, Mohd. Sultan Ibrahim, et al.
出版: (2017)

The post-buckling behavior of the composite plates with embedded shape memory alloy subjected to combined loading using finite element method
由: A.Rasid, Zainudin, et al.
出版: (2013)

Strain behaviour in composite plate girders with imperfect shear connection
由: Mohd Yazmil Md Yatim,, et al.
出版: (2016)

Finite element model updating of dissimilar plate with rivet joint
由: Rahman, Hammad A., et al.
出版: (2019)

Finite Element Analysis of Hybrid Composite Plate through Tensile Test
由: Zakaria, Mohd Faiz Farhan
出版: (2021)

Instabilities in imperfect thick cones subjected to axial compression and external pressure
由: Ifayefunmi, Olawale, et al.
出版: (2013)

Instabilities in imperfect thick cones subjected to axial compression and external pressure
由: Ifayefunmi, Olawale, et al.
出版: (2013)

Finite element analysis of RC beams strengthened with bamboo fibre reinforced composite plate using ANSYS
由: Anas, Shamsudin
出版: (2018)

Response of human bone synthetic under impact load using finite element method
由: Mohamad Shahnaz, Samsul Bahari
出版: (2009)