Staff View: Transformerless resonant converter driving multiple ozone chambers for high flow rates

Transformerless resonant converter driving multiple ozone chambers for high flow rates

Ozone gas (O3) is increasingly used as a bleaching agent due to its strong oxidising properties and less harmful to the environment. The most feasible method to generate O3 is to connect high-voltage of several kV, high-frequency of about tens of kHz power supply across a Dielectric Barrier Discharg...

Full description

Saved in:

Bibliographic Details
Main Author:	Amjad, Muhammad
Format:	Thesis
Language:	English
Published:	2013
Subjects:	TK Electrical engineering. Electronics Nuclear engineering
Online Access:	http://eprints.utm.my/id/eprint/36662/1/MuhammadAmjadPFKE2013.pdf http://eprints.utm.my/id/eprint/36662/ http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:77835?queryType=vitalDismax&query=Transformerless+resonant+converter+driving+multiple+ozone+chambers+for+high+flow+rates&public=true
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my.utm.36662
record_format	eprints
spelling	my.utm.366622017-09-19T03:42:03Z http://eprints.utm.my/id/eprint/36662/ Transformerless resonant converter driving multiple ozone chambers for high flow rates Amjad, Muhammad TK Electrical engineering. Electronics Nuclear engineering Ozone gas (O3) is increasingly used as a bleaching agent due to its strong oxidising properties and less harmful to the environment. The most feasible method to generate O3 is to connect high-voltage of several kV, high-frequency of about tens of kHz power supply across a Dielectric Barrier Discharge (DBD) chamber. Commonly, a resonant power supply with the ferrite transformer is used. However, the presence of the transformer increases the cost and footprint, while reduces the efficiency of the ozone generator. To overcome these deficiencies, this work proposes a design and implementation of an ozone power supply based on transformerless resonant converter. A standard full-bridge inverter is coupled to a resonant tank circuit, i.e. LC and LCL to achieve the required high voltage. The LCL exhibits a double resonance phenomenon resulting in very high voltage gain (above 150). Consequently, the power supply is capable of delivering sufficient potential to the chamber, even if the source voltage is below 20 V. Experimental measurements show that the efficiency of the proposed generator is 92%, while the maximum ozone concentration achieved 8.0 g/m3 at a flow rate of 1.0 L/min. This performance is much higher than the existing transformer based resonant converters. This thesis also introduces the concept of ozone generation using multiple chambers. The objective is to maintain a high O3 concentration at high flow rates. To realise the idea, the same LCL transformerless ozone generator is used to drive three ozone chambers in parallel. The results indicate that the achieved ozone concentration is three times higher than the output of a single chamber. Furthermore, a closed loop regulation to maintain a stable and constant chamber’s output voltage is designed. Another contribution of this work is the introduction of a simple and effective method to characterise the DBD chamber parameters. Traditionally, Lissajous figures are employed to estimate the values of the chamber’s resistor and capacitor. However, this method proves unsatisfactory at high frequencies. Using the proposed method, the chamber parameters can be determined accurately at various frequencies. 2013 Thesis NonPeerReviewed application/pdf en http://eprints.utm.my/id/eprint/36662/1/MuhammadAmjadPFKE2013.pdf Amjad, Muhammad (2013) Transformerless resonant converter driving multiple ozone chambers for high flow rates. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering. http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:77835?queryType=vitalDismax&query=Transformerless+resonant+converter+driving+multiple+ozone+chambers+for+high+flow+rates&public=true
institution	Universiti Teknologi Malaysia
building	UTM Library
collection	Institutional Repository
continent	Asia
country	Malaysia
content_provider	Universiti Teknologi Malaysia
content_source	UTM Institutional Repository
url_provider	http://eprints.utm.my/
language	English
topic	TK Electrical engineering. Electronics Nuclear engineering
spellingShingle	TK Electrical engineering. Electronics Nuclear engineering Amjad, Muhammad Transformerless resonant converter driving multiple ozone chambers for high flow rates
description	Ozone gas (O3) is increasingly used as a bleaching agent due to its strong oxidising properties and less harmful to the environment. The most feasible method to generate O3 is to connect high-voltage of several kV, high-frequency of about tens of kHz power supply across a Dielectric Barrier Discharge (DBD) chamber. Commonly, a resonant power supply with the ferrite transformer is used. However, the presence of the transformer increases the cost and footprint, while reduces the efficiency of the ozone generator. To overcome these deficiencies, this work proposes a design and implementation of an ozone power supply based on transformerless resonant converter. A standard full-bridge inverter is coupled to a resonant tank circuit, i.e. LC and LCL to achieve the required high voltage. The LCL exhibits a double resonance phenomenon resulting in very high voltage gain (above 150). Consequently, the power supply is capable of delivering sufficient potential to the chamber, even if the source voltage is below 20 V. Experimental measurements show that the efficiency of the proposed generator is 92%, while the maximum ozone concentration achieved 8.0 g/m3 at a flow rate of 1.0 L/min. This performance is much higher than the existing transformer based resonant converters. This thesis also introduces the concept of ozone generation using multiple chambers. The objective is to maintain a high O3 concentration at high flow rates. To realise the idea, the same LCL transformerless ozone generator is used to drive three ozone chambers in parallel. The results indicate that the achieved ozone concentration is three times higher than the output of a single chamber. Furthermore, a closed loop regulation to maintain a stable and constant chamber’s output voltage is designed. Another contribution of this work is the introduction of a simple and effective method to characterise the DBD chamber parameters. Traditionally, Lissajous figures are employed to estimate the values of the chamber’s resistor and capacitor. However, this method proves unsatisfactory at high frequencies. Using the proposed method, the chamber parameters can be determined accurately at various frequencies.
format	Thesis
author	Amjad, Muhammad
author_facet	Amjad, Muhammad
author_sort	Amjad, Muhammad
title	Transformerless resonant converter driving multiple ozone chambers for high flow rates
title_short	Transformerless resonant converter driving multiple ozone chambers for high flow rates
title_full	Transformerless resonant converter driving multiple ozone chambers for high flow rates
title_fullStr	Transformerless resonant converter driving multiple ozone chambers for high flow rates
title_full_unstemmed	Transformerless resonant converter driving multiple ozone chambers for high flow rates
title_sort	transformerless resonant converter driving multiple ozone chambers for high flow rates
publishDate	2013
url	http://eprints.utm.my/id/eprint/36662/1/MuhammadAmjadPFKE2013.pdf http://eprints.utm.my/id/eprint/36662/ http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:77835?queryType=vitalDismax&query=Transformerless+resonant+converter+driving+multiple+ozone+chambers+for+high+flow+rates&public=true
_version_	1643649995196334080
score	13.211869

Transformerless resonant converter driving multiple ozone chambers for high flow rates

Similar Items