Cover Image

Effect of silicon morphology on various machinability parameters when turning A1-Si-Cu-Mg alloy

Saved in:

Bibliographic Details
Main Author:	Barzani, Mohsen Marani
Format:	Thesis
Published:	2012
Subjects:	Unspecified
Online Access:	http://eprints.utm.my/id/eprint/32035/
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Effect of machining parameters on cutting force when turning untreated and sb-treated al-11%si-1.8%Cu alloys using PVD coated tools
by: Barzani, Mohsen Marani, et al.
Published: (2012)

Machinability of al-11si-2cu cast alloy modified by bismuth, strontium or antimony / Mohsen Marani Barzani
by: Mohsen Marani, Barzani
Published: (2015)

Characterization of amorphous silicon-carbon alloy films (a-Si:C:H)
by: Lau, Chen Chen
Published: (2005)

Performance evaluation of different edge geometry when turning hardened DF3 tool steel
by: Davoudinejad, Ali
Published: (2012)

Performance evaluation of wiper and conventional coated ceramic inserts when turning hardened tool steel
by: Affandi Mohd. Zainal, Affandi
Published: (2006)

Performance of cubic boron nitride and mixed ceramics tools when hard turning tool steel
by: Mohamad, Ahmad Kamely
Published: (2008)

Wear mechanism and surface integrity studies when turning hardened tool steel using wiper coated ceramic tool
by: Umar, Alkali Adam
Published: (2011)

Thixoformability of Al-Si-Cu-Mg alloys for semisolid metal processing
Published: (2022)

The effects of addition of Zn, Sn, Mg, Cu, Fe, and Si on the morphology and corrosion behaviour of aluminium alloys in seawater
by: Ahmad A., et al.
Published: (2023)

Lost foam casting of aluminium - silicon (LM6) cast alloy
by: G. Khalifa, Alsalihin
Published: (2009)

Influence of Cu content on microstructure and mechanical properties of thixoformed Al−Si−Cu−Mg alloys
by: Salleh, Mohd Shukor, et al.
Published: (2015)

Effects of cutting condition on surface roughness when turning untreated and sb-treated al-11%si alloys using pvd coated tools
by: Barzani, M. M., et al.
Published: (2013)

Fuzzy logic based model for predicting surface roughness of machined Al-Si-Cu-Fe die casting alloy using different additives-turning
by: Barzani, M.M., et al.
Published: (2015)

Effect of machining parameters and bismuth addition on al-20%mg2si machinability during dry turning
by: Razavykia, Abbas
Published: (2014)

Optimization of machining parameters while wedming titanium alloy (T16AL4V)
by: Ghodsiyeh, Danial
Published: (2012)

Effect of Mg, Si and Cu content on the microstructure of dilute 6000 series aluminium alloys
by: Aiza, Jaafar, et al.
Published: (2011)

$Investigation on the aging responses and fracture surface morphology of Al- Mg -Si alloys with different weight percent of Mg and Si compositions (SCOPUS)$

Investigation on the aging responses and fracture surface morphology of Al- Mg -Si alloys with different weight percent of Mg and Si compositions (SCOPUS)
by: Che Nor Aiza Jaafar
Published: (2021)

High speed drilling of A1-Si (A383) alloy using carbide tools
by: Farid, Ali Akhavan
Published: (2012)

Doe applied to study the effect of process parameters on silicon spacing in lost foam Al-Si-Cu alloy casting
by: Shayganpour, Amir Reza, et al.
Published: (2012)

The effect of pre-treatment parameters on titanium alloys prior to PVD coating
by: Mohammad Khanlou, Hossein
Published: (2012)

Effect of different machining parameters on surface roughness of aluminum alloys based on Si and Mg content
by: Baloch, Abdul Hameed
Published: (2015)

Effect of different machining parameters on the surface roughness of aluminium alloys based on Si and Mg content
by: Sadiq, T. O., et al.
Published: (2019)

Effects Of Mg, Si And Cu On Ageing Response Of Dilute 6XXXX Series Aluminium Alloys
by: Jaafar, Che Nor Aiza
Published: (2011)

The effects of mg addition on the microstructure and mechanical properties of Thixoformed Al-5%Si-Cu alloys
by: Salleh, Mohd Shukor, et al.
Published: (2014)

Evaluating the effect of pretreatment parameters on cobalt chromium molybdenum alloy prior to PVD coating
by: Shirazifard, Shahin Hamtaiepour
Published: (2012)

Structural morphology of Al-Mg-Si alloy friction stir welds through tool eccentricity
by: L. H., Shah, et al.
Published: (2020)

Performance evaluation of wire electro discharge machining on silicon carbide
by: Abu, Mohd. Yazid
Published: (2012)

Computer based training for computer numerical control turning process
by: Mohamad Jaya, Abdul Syukor
Published: (2005)

Surface integrity of titanium when machining with various cutting parameter
by: Mohd 'Azim, Ab. Halim
Published: (2010)

Wear Behaviour of Silicone Coated Carbide (SiC) at Different Machining Parameter on Aluminium Alloy T6061 Machining
by: Z. Karim, M. Wafi M., et al.
Published: (2013)

PCD turning of hypereutectic Al-18wt% Si alloy
by: Sudin, Izman, et al.
Published: (2007)

Investigating the Machinability of Al-Si-Cu cast alloy containing bismuth and antimony using coated carbide insert
by: Barzani, M.M., et al.
Published: (2015)

Modelling of stagnant zone formation on diamond cutting tool when turning titanium alloy
by: Thet, Thet Mon
Published: (2007)

Nitridation of Al-Mg-Si alloys through dynamic heating
by: Roslinda, Shamsudin, et al.
Published: (2009)

Effect of barium on the structure and characteristics of Mg2Si reinforced particles Al–Mg2Si–Cu in situ composite
by: Nordin, Nur Azmah, et al.
Published: (2020)

effect of cerium and barium additions and superheating melt treatment on the morphology and hardness of al-mg2si-cu composite
by: Nordin, Nur Azmah
Published: (2017)

Effect of cerium and barium additions and superheating melt treatment on the morphology and hardness of al-mg2si-cu composite
by: Nordin, Nur Azmah
Published: (2017)

Nitridation of AL-Mg-Si alloys through dynamic heating = Penitridaan aloi AL-Mg-Si secara pemanasan dinamik
by: Roslinda Shamsudin,, et al.
Published: (2007)

Ultrasonic machining of ternary titanium aluminide intermetallic alloys using taguchi approach
by: Bakri, Mustafa
Published: (2006)

Characterization of casting alloy Al 319 (Al-12Si-4Cu-0.1Mg), PROTON cylinder head
by: Khairul Khusairi Kamaludin
Published: (2009)