Microstrip antenna incorporated with left-handed metamaterial at 2.7 GHz
The scope of this project was to design and simulate left-handed metamaterial structure incorporated with a single microstrip patch antenna at 2.7 GHz. The combination of the modified square rectangular split ring (SRR) and the capacitance loaded strip (CLS) was used to obtain the negative value of...
Saved in:
| Main Authors: | , , |
|---|---|
| 格式: | Book Section |
| 出版: |
Institute of Electrical and Electronics Engineers
2009
|
| 主题: | |
| 在线阅读: | http://eprints.utm.my/id/eprint/12953/ http://dx.doi.org/10.1109/IWAT.2009.4906918 |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | The scope of this project was to design and simulate left-handed metamaterial structure incorporated with a single microstrip patch antenna at 2.7 GHz. The combination of the modified square rectangular split ring (SRR) and the capacitance loaded strip (CLS) was used to obtain the negative value of permeability, µ and the negative permittivity, e. From the simulation and fabrication done, the gain of the antenna has been increased up to 4 dB. This had proven that the LH MTM can enhance the gain of the antenna. |
|---|