Quasiturbine rotor development optimization
The Quasiturbine compressor is still in developing level and its have more advantages if compare with wankel and reciprocating compressors. Quasiturbine was separated in two main important components which they are housing and rotor .Quasiturbine rotor contains a number of parts such as blades, s...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English English English |
| 出版: |
2014
|
| 主題: | |
| 在線閱讀: | http://eprints.uthm.edu.my/1537/1/24p%20MOHAMMED%20AKRAM%20MOHAMMED.pdf http://eprints.uthm.edu.my/1537/2/MOHAMMED%20AKRAM%20MOHAMMED%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/1537/3/MOHAMMED%20AKRAM%20MOHAMMED%20WATERMARK.pdf http://eprints.uthm.edu.my/1537/ |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | The Quasiturbine compressor is still in developing level and its have more advantages
if compare with wankel and reciprocating compressors. Quasiturbine was separated in
two main important components which they are housing and rotor .Quasiturbine rotor
contains a number of parts such as blades, seal, support plate and mechanism .This
research focus on modeling and simulation for Quasiturbine seal to improve it and
reduce the wear by using motion analysis tool and simulation tool box in Solidworks
2014 software .This study has simulated the existing design and proposed design of
seal with use Aluminum (1060 alloy ) as a material of seal for both cases . In addition
it has been simulated three different materials for the proposed design of seal
(Aluminum, ductile iron , steel ) .The proposed design of seal was selected as better
design than the existing one when compared the distribution of von Mises stress and
the percentage of deformation for both cases . According to the results of the three
mateials that tested by simulation for the proposed design , ductile iron is the most
suitable materials from the three tested materials for Quasiturbine seal . |
|---|