Cover Image

Effect of V-shaped Side Groove on Shear Lips Formation of Aluminium Alloy 6061 by Charpy Impact Test

This study investigates the effect of V-shaped side grooves on shear lip formation in aluminium alloy 6061 through Charpy impact testing. Aluminium is used in machines and industry as a structural component due to its mechanical properties, lightweight characteristics, easy fabrication, and high spe...

Full description

Saved in:

Bibliographic Details
Main Authors:	Awang Morni, Dayang Raihanah, Harimon, Mohd Azhar, -, Nafisah Arina Hidayati
Format:	Article
Language:	English
Published:	semarak ilmu 2024
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://eprints.uthm.edu.my/12405/1/J17870_b381ab52f9def656ab865823c53d8e09.pdf http://eprints.uthm.edu.my/12405/ https://doi.org/10.37934/aram.118.1.157166
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Simple and fast damage identification on 6061 aluminium based on mode shape curvature
by: Parnon, Mohamad Afiq Amiruddin, et al.
Published: (2022)

Simple and fast damage identification on 6061 aluminium based on mode shape curvature
by: M. A., Amiruddin, et al.
Published: (2022)

Effect of loading rates and single edge notch bending (SENB) specimen thicknesses on shear lips formation for Al6061 alloy
by: Abdul Latif, Noradila, et al.
Published: (2019)

Modeling And Control Of V-Groove Rotary Impact Driver
by: Leong, Chi Hoe
Published: (2020)

Mechanical and fluidic analysis of hollow side-open and outer-grooved design of microneedles
by: Ahmad, Nur Farrahain Nadia, et al.
Published: (2021)

$Estimation of fracture toughness (K-IC) using Charpy impact test for Al6061T6 and Al7075T6 alloys subjected to corrosion$

Estimation of fracture toughness (K-IC) using Charpy impact test for Al6061T6 and Al7075T6 alloys subjected to corrosion
by: Kumar, S. Sunil, et al.
Published: (2021)

Determination of groove and mechanical properties of underside shaped concrete paver
by: Mohamed, Azman, et al.
Published: (2016)

Surface reproduction of elastomeric materials: viscosity and groove shape effects
by: Mahmood, N., et al.
Published: (2010)

Cold compression in direct recycling of aluminium 6061
by: Chan, Boon Loong
Published: (2016)

Effect of aging on machinability of 6061 aluminium alloy
by: Emir Izwandy, Dzulkafli
Published: (2010)

Optimization Of V-Bending Of Aluminium Aa6061 Strip Of Non-Uniform Profile Using The Taguchi Method
by: Adnan, Mohd Fitri
Published: (2017)

Performance of the Single and Double Pass V-Groove Solar Collector
by: Raja Mohamed Abdul Shaini, Raja Mohamed Rizal
Published: (2012)

Wire bond shear test simulation on sharp groove surface bond pad
by: Zaliman, Sauli, Dr., et al.
Published: (2014)

The effect of groove-underside shaped concrete block on pavement permanent deformation
by: Mohamed, Azman, et al.
Published: (2013)

Improving warpage with milled groove square shape conformal cooling channels
by: Shayfull, Z., et al.
Published: (2016)

Improving warpage with milled groove square shape conformal cooling channels
by: Shayfull Zamree, Abd Rahim, Dr., et al.
Published: (2016)

Effect of the heat treatment on mechanical and physical properties of direct recycled aluminium alloy (AA6061)
by: Rady, Mohammed Hussien, et al.
Published: (2020)

Investigation of impact properties under instrumented Charpy test
by: Ali, Mohd Basri, et al.
Published: (2024)

Drying chamber performance of V-groove forced convective solar dryer
by: A. Eltief, Salah, et al.
Published: (2007)

Teknologi pemotongan V-Grooving bakal pacu industri buluh Malaysia
by: Universiti Putra Malaysia, Bahagian Komunikasi Korporat
Published: (2012)

Fatigue behaviour of aluminium 6061 in tailor welded blank
by: Wan Iryana, Wan Md Nor
Published: (2013)

Shear capacity of C-shaped and L-shaped angle shear connectors
by: Tahmasbi, Farzad, et al.
Published: (2016)

Milled groove square shape conformal cooling channels in injection molding process
by: Shayfull Zamree, Abd. Rahim, et al.
Published: (2014)

Flow control in s-shaped aggressive diffuser using grooves on the inner and outer surfaces
by: Jessam, R.A., et al.
Published: (2016)

Analysis of an Instrumented Charpy Impact Using Power Spectrum Density
by: Ali, Mohd Basri
Published: (2011)

The effect of resting morphological lip shape during lip movement: A three-dimensional motion analysis study
by: Nasir, Siti Hajjar, et al.
Published: (2020)

Multiaxial Fatigue Behaviour Of Heat Treated 6061 Aluminium Alloy
by: Marno, Marini
Published: (2011)

Multiaxial Fatigue Behaviour Of Heat Treated 6061 Aluminium Alloy
by: Marno, Marini
Published: (2011)

Reduction Of Corrosion Rate Of Aluminium Alloy 6061 Through Anodization
by: Abd Samad, Md Fahmi, et al.
Published: (2020)

Direct recycling of aluminium 6061 chip through cold compression
by: Chan, B.L., et al.
Published: (2015)

Friction stir welding using rice husk on aluminium 6061
by: Jajuli, Sarah Syafiqah
Published: (2021)

Impact energy in heat-treated aluminium alloy 6061 and 7075
by: Zainuddin, Hikmah, et al.
Published: (2024)

Corrosion inhibition of 6061 aluminium alloy in marine environments by milk
by: Mohd Zulkarnain, Zulkifli
Published: (2010)

Corrosion inhibition of 6061 aluminium alloy in acidic media by honey
by: Mohd Azzizul, Chamingan
Published: (2010)

Effect of aging on corrosion behaviour of AA6061 aluminium alloy
by: Mohd Syahidan, Mohamed Nawi
Published: (2012)

Experimental Analysis of an Instrumented Charpy Impact Using Signal Processing Approach
by: Ali, Mohd Basri
Published: (2011)

Investigation of Energy Absorbed from an Instrumented Charpy Impact on Automotive Specimens
by: Ali, Mohd Basri
Published: (2012)

Instrumented Charpy impact test / Syamsul El-Adha and Haidil Mustafa
by: El-Adha, Syamsul, et al.
Published: (1996)

The geometry of the trochlear groove
by: Iranpour, F., et al.
Published: (2010)

Analysis Of Fracture Behaviour For Aluminium 6061 By Using Finite Element Analysis
by: Dunstan Dungat, Tedong
Published: (2018)