SINGLE STAGE RF AMPLIFIER AT 5.8GHZ ISM BAND WITH IEEE 802.11a STANDARD
This paper describes the circuit design and measurement of a single stage RF amplifier for 5.8 GHz-band with IEEE 802.11a standards for WLAN applications.The circuit was simulated using Ansoft Designer where a 14dB of gain; input and output return loss less than -10dB were observed. The GaAs Hetroju...
保存先:
| 主要な著者: | , , , , , |
|---|---|
| フォーマット: | Conference or Workshop Item |
| 言語: | English |
| 出版事項: |
2007
|
| 主題: | |
| オンライン･アクセス: | http://eprints.utem.edu.my/id/eprint/6831/1/Single_stage_RF_amplifier_at_5.8GHz_ISM_band_with_IEEE_802.11a_standard.pdf http://eprints.utem.edu.my/id/eprint/6831/ http://www.apace2007.org/ |
| タグ: |
タグ追加
タグなし, このレコードへの初めてのタグを付けませんか!
|
| 要約: | This paper describes the circuit design and measurement of a single stage RF amplifier for 5.8 GHz-band with IEEE 802.11a standards for WLAN applications.The circuit was simulated using Ansoft Designer where a 14dB of gain; input and output return loss less than -10dB were observed. The GaAs Hetrojunction FET (HFET), capacitors and resistors are combined with the microstrip line pattern by silver epoxy. A 1dB output power compression point (P1dB) of 17dBm and 14.56dB of gain when -1dBm power injected under 6V and ½ Idss biasing are measured. |
|---|