صورة الغلاف

Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing)

Nowadays, materials that have been extensively used in the automotive industry are low carbon steel, high strength steel, aluminium, plastics and composites. However, plastic materials are not commonly used as a vehicle body part because their properties are much lower than steel in term of tensile...

وصف كامل

محفوظ في:
التفاصيل البيبلوغرافية
المؤلف الرئيسي: Shafiq Aripin, Muhammad Wazir
التنسيق: أطروحة
اللغة:English
English
منشور في: 2019
الموضوعات:
T Technology (General)
TS Manufactures
الوصول للمادة أونلاين:http://eprints.utem.edu.my/id/eprint/25158/1/Effect%20Of%20Electroless%20Plating%20Layer%20Thickness%20On%20Mechanical%20Properties%20Of%20Rapid%20Prototyping%20%283D%20Printing%29.pdf
http://eprints.utem.edu.my/id/eprint/25158/2/Effect%20Of%20Electroless%20Plating%20Layer%20Thickness%20On%20Mechanical%20Properties%20Of%20Rapid%20Prototyping%20%283D%20Printing%29.pdf
http://eprints.utem.edu.my/id/eprint/25158/
https://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=117861
الوسوم: إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
id my.utem.eprints.25158
record_format eprints
spelling my.utem.eprints.251582021-09-29T09:54:50Z http://eprints.utem.edu.my/id/eprint/25158/ Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing) Shafiq Aripin, Muhammad Wazir T Technology (General) TS Manufactures Nowadays, materials that have been extensively used in the automotive industry are low carbon steel, high strength steel, aluminium, plastics and composites. However, plastic materials are not commonly used as a vehicle body part because their properties are much lower than steel in term of tensile strength and impact strength but on the other hand, plastics are very light compared to steel. Several types of plastic that commonly used in the automotive industry are such as acrylonitrile butadiene styrene (ABS) and polypropylene (PP). In order to improve the surface finish of ABS, a thin coating on the top of the surface is needed. Therefore, this study was carried out in order to analyze the effect of different rapid prototyping path on tensile strength, impact strength and surface roughness properties as well as to investigate the effect of different coating on ABS. This study was divided into three sections, that are none coating, spray paint coating, and electroless plating. Two parameters that has been used in rapid prototyping were a vertical and horizontal path of position printing. This study also used a quantitative experiment using an analysis of variance (ANOVA). The results show that the significant factor that affect on ABS 3D printing were vertical path of position printing and electroless plating. Vertical path of position printing contributed significantly in increasing tensile strength and impact strength. Whereas, the surface roughness shows a minimum value when using electroless plating as a coating medium. The results of tensile strength, impact strength and surface roughness obtained from this experiment were 17.14 MPa, 0.03937 J/mm2 and 0.7533 μm respectively when these two parameters were applied during the experiment. 2019 Thesis NonPeerReviewed text en http://eprints.utem.edu.my/id/eprint/25158/1/Effect%20Of%20Electroless%20Plating%20Layer%20Thickness%20On%20Mechanical%20Properties%20Of%20Rapid%20Prototyping%20%283D%20Printing%29.pdf text en http://eprints.utem.edu.my/id/eprint/25158/2/Effect%20Of%20Electroless%20Plating%20Layer%20Thickness%20On%20Mechanical%20Properties%20Of%20Rapid%20Prototyping%20%283D%20Printing%29.pdf Shafiq Aripin, Muhammad Wazir (2019) Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing). Masters thesis, Universiti Teknikal Malaysia Melaka. https://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=117861
institution Universiti Teknikal Malaysia Melaka
building UTEM Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknikal Malaysia Melaka
content_source UTEM Institutional Repository
url_provider http://eprints.utem.edu.my/
language English
English
topic T Technology (General)
TS Manufactures
spellingShingle T Technology (General)
TS Manufactures
Shafiq Aripin, Muhammad Wazir
Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing)
description Nowadays, materials that have been extensively used in the automotive industry are low carbon steel, high strength steel, aluminium, plastics and composites. However, plastic materials are not commonly used as a vehicle body part because their properties are much lower than steel in term of tensile strength and impact strength but on the other hand, plastics are very light compared to steel. Several types of plastic that commonly used in the automotive industry are such as acrylonitrile butadiene styrene (ABS) and polypropylene (PP). In order to improve the surface finish of ABS, a thin coating on the top of the surface is needed. Therefore, this study was carried out in order to analyze the effect of different rapid prototyping path on tensile strength, impact strength and surface roughness properties as well as to investigate the effect of different coating on ABS. This study was divided into three sections, that are none coating, spray paint coating, and electroless plating. Two parameters that has been used in rapid prototyping were a vertical and horizontal path of position printing. This study also used a quantitative experiment using an analysis of variance (ANOVA). The results show that the significant factor that affect on ABS 3D printing were vertical path of position printing and electroless plating. Vertical path of position printing contributed significantly in increasing tensile strength and impact strength. Whereas, the surface roughness shows a minimum value when using electroless plating as a coating medium. The results of tensile strength, impact strength and surface roughness obtained from this experiment were 17.14 MPa, 0.03937 J/mm2 and 0.7533 μm respectively when these two parameters were applied during the experiment.
format Thesis
author Shafiq Aripin, Muhammad Wazir
author_facet Shafiq Aripin, Muhammad Wazir
author_sort Shafiq Aripin, Muhammad Wazir
title Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing)
title_short Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing)
title_full Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing)
title_fullStr Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing)
title_full_unstemmed Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing)
title_sort effect of electroless plating layer thickness on mechanical properties of rapid prototyping (3d printing)
publishDate 2019
url http://eprints.utem.edu.my/id/eprint/25158/1/Effect%20Of%20Electroless%20Plating%20Layer%20Thickness%20On%20Mechanical%20Properties%20Of%20Rapid%20Prototyping%20%283D%20Printing%29.pdf
http://eprints.utem.edu.my/id/eprint/25158/2/Effect%20Of%20Electroless%20Plating%20Layer%20Thickness%20On%20Mechanical%20Properties%20Of%20Rapid%20Prototyping%20%283D%20Printing%29.pdf
http://eprints.utem.edu.my/id/eprint/25158/
https://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=117861
_version_ 1713203463515537408
score 13.251813

مواد مشابهة