Cover Image

Fabricate And Investigate The Performance Of Alumina Based Ceramic Cutting Tool With Different Edge

The research in this project focused on the comparison performance between two cutting tools with different edge. Both cutting tools will be fabricated based on the alumina powder processing with round and sharp edges. For each cutting tool, a special mould will be utilized according to the required...

Full description

Saved in:
Bibliographic Details
Main Author: Mat Amin, Mohd Imran
Format: Thesis
Language:English
English
Published: 2018
Subjects:
T Technology (General)
TJ Mechanical engineering and machinery
Online Access:http://eprints.utem.edu.my/id/eprint/23889/1/Fabricate%20And%20Investigate%20The%20Performance%20Of%20Alumina%20Based%20Ceramic%20Cutting%20Tool%20With%20Different%20Edge.pdf
http://eprints.utem.edu.my/id/eprint/23889/2/Fabricate%20And%20Investigate%20The%20Performance%20Of%20Alumina%20Based%20Ceramic%20Cutting%20Tool%20With%20Different%20Edge.pdf
http://eprints.utem.edu.my/id/eprint/23889/
http://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=113639
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.utem.eprints.23889
record_format eprints
spelling my.utem.eprints.238892022-02-18T15:15:02Z http://eprints.utem.edu.my/id/eprint/23889/ Fabricate And Investigate The Performance Of Alumina Based Ceramic Cutting Tool With Different Edge Mat Amin, Mohd Imran T Technology (General) TJ Mechanical engineering and machinery The research in this project focused on the comparison performance between two cutting tools with different edge. Both cutting tools will be fabricated based on the alumina powder processing with round and sharp edges. For each cutting tool, a special mould will be utilized according to the required shape. Specific weight of alumina powder will be processed with ball mill and poured into the designated mould to produce the green body of alumina inserts. These green bodies will be sintered at proposed 1400oC with 9 hours soaking time to produce refractory solid ceramic inserts. The mechanical properties of both insert will be examined according to the density, hardness and dimensions. The cutting tools will be further tested in tool wear evaluation by machining with AISI 1045 with variation of cutting speeds and feed rates around 200-250 m/min and 0.1-0.125 mm/rev respectively, while depth of cut will be kept constant at 0.5 mm. The wear at the edge of both inserts will be monitored with optical microscope and further scrutinized using Scanning Electron Microscope for failure modes analysis. On the same time, the surface roughness will be assessing using surface roughness tester and optical microscope to differentiate the surface characteristics machined by the cutting tools fabricated. The results from this study should be useful to develop alumina based cutting tool for low cost and small scale machining operations. 2018 Thesis NonPeerReviewed text en http://eprints.utem.edu.my/id/eprint/23889/1/Fabricate%20And%20Investigate%20The%20Performance%20Of%20Alumina%20Based%20Ceramic%20Cutting%20Tool%20With%20Different%20Edge.pdf text en http://eprints.utem.edu.my/id/eprint/23889/2/Fabricate%20And%20Investigate%20The%20Performance%20Of%20Alumina%20Based%20Ceramic%20Cutting%20Tool%20With%20Different%20Edge.pdf Mat Amin, Mohd Imran (2018) Fabricate And Investigate The Performance Of Alumina Based Ceramic Cutting Tool With Different Edge. Masters thesis, Universiti Teknikal Malaysia Melaka. http://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=113639
institution Universiti Teknikal Malaysia Melaka
building UTEM Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknikal Malaysia Melaka
content_source UTEM Institutional Repository
url_provider http://eprints.utem.edu.my/
language English
English
topic T Technology (General)
TJ Mechanical engineering and machinery
spellingShingle T Technology (General)
TJ Mechanical engineering and machinery
Mat Amin, Mohd Imran
Fabricate And Investigate The Performance Of Alumina Based Ceramic Cutting Tool With Different Edge
description The research in this project focused on the comparison performance between two cutting tools with different edge. Both cutting tools will be fabricated based on the alumina powder processing with round and sharp edges. For each cutting tool, a special mould will be utilized according to the required shape. Specific weight of alumina powder will be processed with ball mill and poured into the designated mould to produce the green body of alumina inserts. These green bodies will be sintered at proposed 1400oC with 9 hours soaking time to produce refractory solid ceramic inserts. The mechanical properties of both insert will be examined according to the density, hardness and dimensions. The cutting tools will be further tested in tool wear evaluation by machining with AISI 1045 with variation of cutting speeds and feed rates around 200-250 m/min and 0.1-0.125 mm/rev respectively, while depth of cut will be kept constant at 0.5 mm. The wear at the edge of both inserts will be monitored with optical microscope and further scrutinized using Scanning Electron Microscope for failure modes analysis. On the same time, the surface roughness will be assessing using surface roughness tester and optical microscope to differentiate the surface characteristics machined by the cutting tools fabricated. The results from this study should be useful to develop alumina based cutting tool for low cost and small scale machining operations.
format Thesis
author Mat Amin, Mohd Imran
author_facet Mat Amin, Mohd Imran
author_sort Mat Amin, Mohd Imran
title Fabricate And Investigate The Performance Of Alumina Based Ceramic Cutting Tool With Different Edge
title_short Fabricate And Investigate The Performance Of Alumina Based Ceramic Cutting Tool With Different Edge
title_full Fabricate And Investigate The Performance Of Alumina Based Ceramic Cutting Tool With Different Edge
title_fullStr Fabricate And Investigate The Performance Of Alumina Based Ceramic Cutting Tool With Different Edge
title_full_unstemmed Fabricate And Investigate The Performance Of Alumina Based Ceramic Cutting Tool With Different Edge
title_sort fabricate and investigate the performance of alumina based ceramic cutting tool with different edge
publishDate 2018
url http://eprints.utem.edu.my/id/eprint/23889/1/Fabricate%20And%20Investigate%20The%20Performance%20Of%20Alumina%20Based%20Ceramic%20Cutting%20Tool%20With%20Different%20Edge.pdf
http://eprints.utem.edu.my/id/eprint/23889/2/Fabricate%20And%20Investigate%20The%20Performance%20Of%20Alumina%20Based%20Ceramic%20Cutting%20Tool%20With%20Different%20Edge.pdf
http://eprints.utem.edu.my/id/eprint/23889/
http://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=113639
_version_ 1725976111168356352
score 13.211869

Similar Items