Cover Image

Effect Of Operating Parameters And Chemical Treatment On The Tribological Performance Of Natural Fiber Composites : A Review

-

Saved in:

Bibliographic Details
Main Authors:	Shuhimi, Fairuz Fazillah, Abdollah, Mohd Fadzli, Kalam, M.A., Masjuki, Hassan, Mustafa, Ashafi’e, Mat Kamal, Sushella Edayu, Amiruddin, Hilmi
Format:	Article
Language:	English
Published:	Taylor & Francis 2017
Subjects:	T Technology (General) TA Engineering (General). Civil engineering (General) TS Manufactures
Online Access:	http://eprints.utem.edu.my/id/eprint/19927/2/pst.pdf http://eprints.utem.edu.my/id/eprint/19927/ http://www.tandfonline.com/doi/abs/10.1080/02726351.2015.1119226?journalCode=upst20
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Tribological Characteristics Comparison For Oil Palm Fibre/Epoxy And Kenaf Fibre/Epoxy Composites Under Dry Sliding Conditions
by: Fairuz Fazillah, Shuhimi, et al.
Published: (2016)

Optimization Of Friction Properties Of Kenaf Polymer Composite As An Alternative Friction Material
by: Mustafa, Ashafi'e, et al.
Published: (2017)

Selection and Verification of Kenaf Fibres as an Alternative Friction Material Using Weighted Decision Matrix Method
by: Mustafa, Ashafi'e, et al.
Published: (2014)

Selection and Verification of Kenaf Fibres as an Alternative Friction Material Using Weighted Decision Matrix Method
by: Mustafa, Ashafi'e, et al.
Published: (2014)

Selection and verification of kenaf fibres as an alternative friction material using weighted decision matrix method
by: Mustafa, Ashafi'e, et al.
Published: (2015)

Tribology-Related Researches at Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka (UTeM)
by: Abdollah, Mohd Fadzli bin, et al.
Published: (2012)

Wear failure analysis of empty fruit bunch and kenaf fibres composites
by: Shuhimi, Fairuz Fazillah
Published: (2017)

Materials Selection for Eco-Aware Lightweight Friction Material
by: Mustafa, Ashafi'e, et al.
Published: (2014)

Materials Selection for Eco-Aware Lightweight Friction Material
by: Mustafa, Ashafi'e, et al.
Published: (2014)

Selection And Optimization Of Kenaf/Epoxy Composite As An Alternative Friction Material
by: Mustafa, Ashafi'e
Published: (2017)

The Effect Of Dimple Size On The Tribological Performances Of A Laser Surface Textured Palm Kernel Activated Carbon-Epoxy Composite
by: Mohmad, Martini, et al.
Published: (2017)

Pre-Materials Selection for Eco-Aware Lightweight Friction Material
by: Ashafi'e, Mustafa, et al.
Published: (2014)

Materials Selection for Eco-Aware Lightweight Friction Material
by: Mustafa, Ashafi'e, et al.
Published: (2014)

The Effect Of Sliding Distance At Different Temperatures On The Tribological Properties Of A Palm Kernel Activated Carbon-Epoxy Composite
by: Mat Tahir, Noor Ayuma, et al.
Published: (2016)

Applied normal load and printing layer thickness relationship on the tribological properties of novel 3D-printed PLA-PCU polymer blend
by: Shaharuddin, Shanahs, et al.
Published: (2023)

Tribology in Malaysia: General perspective
by: Abdollah, Mohd Fadzli bin
Published: (2016)

The effect of temperature on the tribological properties of palm kernel activated carbonepoxy composite
by: Mat Tahir, Noor Ayuma, et al.
Published: (2015)

The Effect of Temperature on Tribological Properties of Chemically Modified Bio-Based Lubricant
by: Zulkifli, Nurin Wahidah Mohd, et al.
Published: (2014)

Drive to Greener Future: Tribological and Engine Performances of Nano-Oil
by: Abdollah, Mohd Fadzli bin, et al.
Published: (2014)

Experimental investigation of tribological properties of laser textured tungsten doped diamond like carbon coating under dry sliding conditions at various loads
by: Arslan, A., et al.
Published: (2019)

Influence Of Contact Pressure And Sliding Speed Dependence On The Tribological Characteristics Of An Activated Carbon Epoxy Composite Derived From Palm Kernel Under Dry Sliding Conditions
by: Abdollah, Mohd Fadzli, et al.
Published: (2019)

The effect of sliding distance at different temperatures on the tribological properties of a palm kernel activated carbon–epoxy composite
by: Mat Tahir, Noor Ayuma, et al.
Published: (2016)

Lubricant And Tribological Properties Of Zinc Compound In Palm Oil
by: Md Alias, Muhammad Aizat, et al.
Published: (2019)

Tribological effects of nano-based engine oil diluted with biodiesel fuel
by: Abdullah, Muhammad Ilman Hakimi Chua, et al.
Published: (2017)

Effect of temperature on tribological properties of palm biodiesel
by: Haseeb, A.S. Md. Abdul, et al.
Published: (2010)

Evaluation of tribological performance of hydrogenated DLC by surface texturing in the presence of palm BASED TMP ester at different temperatures
by: Varman, Mahendra, et al.
Published: (2017)

An updated overview of diamond-like carbon coating in tribology
by: Al Mahmud, K.A.H., et al.
Published: (2015)

Comparative Study Of The Tribological Behaviour Of 3D-Printed And Moulded ABS Under Lubricated Condition
by: Abdollah, Mohd Fadzli bin, et al.
Published: (2019)

Investigation of tribological issues in microforming: a review
by: Ali, Mohammad Yeakub, et al.
Published: (2011)

Effect Of Fibre Length And Composition On The Tribological Attributes Of Oil Palm Fibre Polymeric Composite: Organic Brake Friction Material
by: Abdollah, Mohd Fadzli, et al.
Published: (2021)

Graphene Coatings Technology On Tribology Perspective
by: Mat Tahir, Noor Ayuma, et al.
Published: (2019)

Optimization of Tribological Performance of hBN/AL2O3 Nanoparticles as Engine Oil Additives
by: Abdullah, Muhammad Ilman Hakimi Chua, et al.
Published: (2013)

Effect of hBN/Al2O3 Nanoparticle Additives on the Tribological Performance of Engine Oil
by: Abdullah, Muhammad Ilman Hakimi Chua, et al.
Published: (2014)

Effect of hBN/Al2O3 Nanoparticle Additives on the Tribological Performance of Engine Oil
by: Abdullah, Muhammad Ilman Hakimi Chua, et al.
Published: (2014)

Optimization of Tribological Performance of hBN/AL2O3 Nanoparticles as Engine Oil Additives
by: Abdullah, Muhammad Ilman Hakimi Chua, et al.
Published: (2014)

Tribological Performance Of Low Blend Decanter Cake Biodiesel
by: Lee, Shing Chuan, et al.
Published: (2017)

Experimental Analysis Of Tribological Performance Of Palm Oil Blended With Hexagonal Boron Nitride Nanoparticles As An Environment-Friendly Lubricant
by: Abdollah, Mohd Fadzli bin, et al.
Published: (2020)

The effect of temperature on tribological properties of chemically modified bio-based lubricant
by: Mohd Zulkifli, Nurin Wahidah, et al.
Published: (2014)

Effect of process parameters on surface roughness produced by turning boring operation
by: Mohamed, Ahmad Dzia’Uddin
Published: (2010)

Tribological study of A1 based natural fibre reinforced composite brake pad materials
by: Maleque, Md. Abdul, et al.
Published: (2011)