Cover Image

Characterization of Injection Molded 17-4PH Stainless Steel prepared with Waste Rubber Binder

This study is to investigate the sintering characteristics and to establish the best heating rate and soaking time used for sintering process, by determining the physical, mechanical, and microstructural properties of the injection molded 17-4PH stainless steel using waste rubber as a new developed...

Full description

Saved in:
Bibliographic Details
Main Authors: ABD RAZAK , JEEFFERIE, S., Nurhashima, YAAKOB, MOHD YUHAZRI, Sihombing, Haeryip, S., Mohd Shukor, Abdullah, N.S, Omar, M.A
Format: Article
Language:English
Published: Fakulti Kejuruteraan Mekanikal (FKM), Universiti Teknikal Malaysia Melaka (UTeM) 2011
Subjects:
TJ Mechanical engineering and machinery
TS Manufactures
Online Access:http://eprints.utem.edu.my/id/eprint/13648/2/Characterization_of_Injection_Molded_17-4PH_Stainless_Steel_Prepared_with_Waste_Rubber_Binder.pdf
http://eprints.utem.edu.my/id/eprint/13648/
http://www.utem.edu.my
Tags: Add Tag
No Tags, Be the first to tag this record!

Internet

http://eprints.utem.edu.my/id/eprint/13648/2/Characterization_of_Injection_Molded_17-4PH_Stainless_Steel_Prepared_with_Waste_Rubber_Binder.pdf
http://eprints.utem.edu.my/id/eprint/13648/
http://www.utem.edu.my

Similar Items