Collector Efficiency of the Polymer Solar Collector
This paper examines the collector efficiency (F’) of the polymer collector in variation of plate thickness, top heat loss coefficient and ratio of the thermal conductivity to plate thickness (H). The collector efficiency reduced with the increase of the thickness for all cases of top heat loss coeff...
保存先:
主要な著者: | , , , , , |
---|---|
フォーマット: | 論文 |
言語: | English |
出版事項: |
American-Eurasian Network for Scientific Information
2014
|
主題: | |
オンライン・アクセス: | http://eprints.utem.edu.my/id/eprint/13370/1/2583-2588.pdf http://eprints.utem.edu.my/id/eprint/13370/ |
タグ: |
タグ追加
タグなし, このレコードへの初めてのタグを付けませんか!
|
要約: | This paper examines the collector efficiency (F’) of the polymer collector in variation of plate thickness, top heat loss coefficient and ratio of the thermal conductivity to plate thickness (H). The collector efficiency reduced with the increase of the thickness for all cases of top heat loss coefficient (Ut) as expected. Furthermore, the higher H value increased the F’ for all conditions of Ut. The suitable thickness of the collector has been determined in the range of 1.5 to 2.5 mm base on the F’. The top losses heat transfer coefficient should be minimize to obtain higher performance. The polymer collector needs to be optimum design to compensate the low thermal conductivity of the material. |
---|