Cover Image

Spectral Analysis Of Cutting Forces Data For XY Table Ballscrew Drive System

The utilization of spectral analysis for the purpose of investigating machining parameters in frequency domain has been widely practiced by group of researchers in engineering field. In this case the machining parameters involved are the cutting force parameter. By adapting spectral analysis to the...

Full description

Saved in:
Bibliographic Details
Main Authors: Abdullah, Lokman, Jamaludin, Zamberi, Chiew, Tsung Heng, Rafan, Nur Aidawaty, Shaaban, Azizah
Format: Article
Language:English
Published: Trans Tech Publications 2014
Online Access:http://eprints.utem.edu.my/id/eprint/11473/1/JOURNAL_AMM.471.241.pdf
http://eprints.utem.edu.my/id/eprint/11473/
http://www.ttp.net
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.utem.eprints.11473
record_format eprints
spelling my.utem.eprints.114732021-07-13T13:10:55Z http://eprints.utem.edu.my/id/eprint/11473/ Spectral Analysis Of Cutting Forces Data For XY Table Ballscrew Drive System Abdullah, Lokman Jamaludin, Zamberi Chiew, Tsung Heng Rafan, Nur Aidawaty Shaaban, Azizah The utilization of spectral analysis for the purpose of investigating machining parameters in frequency domain has been widely practiced by group of researchers in engineering field. In this case the machining parameters involved are the cutting force parameter. By adapting spectral analysis to the cutting forces data, the researcher will have the access to identify the specific cutting forces exerted to the surface of the workpiece at each particular frequency under a set of frequency content. This paper is paying attention on the essential aspect on how to analyze the cutting forces data appropriately. It is recommended that those data need to be transformed first from the original form of cutting force data in time domain into the form of cutting force data in frequency domain. The outcome from this paper is in the form of graphical representation of cutting force data in frequency domain. It is obtained by applying Fast Fourier Transform (FFT) technique. To be more clear-cut, the result from this research work shows that the cutting force is directly proportional to the depth of cut and inversely proportional to the spindle speed of the end mill machine. The cutting force data later on will be used as an input disturbance for XY table ball screw drive system during the simulation process in the Matlab simulink diagram. Trans Tech Publications 2014 Article PeerReviewed text en http://eprints.utem.edu.my/id/eprint/11473/1/JOURNAL_AMM.471.241.pdf Abdullah, Lokman and Jamaludin, Zamberi and Chiew, Tsung Heng and Rafan, Nur Aidawaty and Shaaban, Azizah (2014) Spectral Analysis Of Cutting Forces Data For XY Table Ballscrew Drive System. Applied Mechanics and Materials, 471 (1). pp. 241-246. ISSN 1660-9336 http://www.ttp.net 10.4028/www.scientific.net/AMM.471.241
institution Universiti Teknikal Malaysia Melaka
building UTEM Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknikal Malaysia Melaka
content_source UTEM Institutional Repository
url_provider http://eprints.utem.edu.my/
language English
description The utilization of spectral analysis for the purpose of investigating machining parameters in frequency domain has been widely practiced by group of researchers in engineering field. In this case the machining parameters involved are the cutting force parameter. By adapting spectral analysis to the cutting forces data, the researcher will have the access to identify the specific cutting forces exerted to the surface of the workpiece at each particular frequency under a set of frequency content. This paper is paying attention on the essential aspect on how to analyze the cutting forces data appropriately. It is recommended that those data need to be transformed first from the original form of cutting force data in time domain into the form of cutting force data in frequency domain. The outcome from this paper is in the form of graphical representation of cutting force data in frequency domain. It is obtained by applying Fast Fourier Transform (FFT) technique. To be more clear-cut, the result from this research work shows that the cutting force is directly proportional to the depth of cut and inversely proportional to the spindle speed of the end mill machine. The cutting force data later on will be used as an input disturbance for XY table ball screw drive system during the simulation process in the Matlab simulink diagram.
format Article
author Abdullah, Lokman
Jamaludin, Zamberi
Chiew, Tsung Heng
Rafan, Nur Aidawaty
Shaaban, Azizah
spellingShingle Abdullah, Lokman
Jamaludin, Zamberi
Chiew, Tsung Heng
Rafan, Nur Aidawaty
Shaaban, Azizah
Spectral Analysis Of Cutting Forces Data For XY Table Ballscrew Drive System
author_facet Abdullah, Lokman
Jamaludin, Zamberi
Chiew, Tsung Heng
Rafan, Nur Aidawaty
Shaaban, Azizah
author_sort Abdullah, Lokman
title Spectral Analysis Of Cutting Forces Data For XY Table Ballscrew Drive System
title_short Spectral Analysis Of Cutting Forces Data For XY Table Ballscrew Drive System
title_full Spectral Analysis Of Cutting Forces Data For XY Table Ballscrew Drive System
title_fullStr Spectral Analysis Of Cutting Forces Data For XY Table Ballscrew Drive System
title_full_unstemmed Spectral Analysis Of Cutting Forces Data For XY Table Ballscrew Drive System
title_sort spectral analysis of cutting forces data for xy table ballscrew drive system
publisher Trans Tech Publications
publishDate 2014
url http://eprints.utem.edu.my/id/eprint/11473/1/JOURNAL_AMM.471.241.pdf
http://eprints.utem.edu.my/id/eprint/11473/
http://www.ttp.net
_version_ 1706960897004535808
score 13.211869

Similar Items