Photovoltaic Thermal Collector System Based On Heterojunction Intrinsic (HIT) Panel
In this project, Photovoltaic thermal or PVT system based on heterojunction intrinsic (HIT) panel was designed, built and tested. This system not only produces electricity but it also generates hot water. HIT PV solar panel with the solar thermal collector and without thermal collector will be pre...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Monograph |
| 語言: | English |
| 出版: |
Universiti Sains Malaysia
2018
|
| 主題: | |
| 在線閱讀: | http://eprints.usm.my/53604/1/Photovoltaic%20Thermal%20Collector%20System%20Based%20On%20Heterojunction%20Intrinsic%20%28HIT%29%20Panel_Muhammad%20Nasrul%20Faiz%20Rosli_E3_2018.pdf http://eprints.usm.my/53604/ |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | In this project, Photovoltaic thermal or PVT system based on heterojunction intrinsic (HIT) panel was designed, built and tested. This system not only produces electricity but it also generates hot water. HIT PV solar panel with the solar thermal
collector and without thermal collector will be presented and analysed. The first objective of this project is to design and test a PVT system based on heterojunction intrinsic (HIT)
panel. The second objective is to compare the performance of the heterojunction intrinsic (HIT) panel with and without the thermal collector. Microcontroller data acquisition was
built to measure and collect data from the system. All the electrical parameter were saved on micro SD card for every 5 minutes using data logger developed using Arduino. The
data collected were used to observe the I-V characteristics of HIT panel with and without thermal collector and also the energy output generated from the system. The experiment
was conducted for 5 hours to obtain output current, output voltage and maximum output power. From the result analysis, the HIT with thermal collector has improved its performance by 22.64% and lowered the solar panel temperature by 9.49%. |
|---|