Cover Image

The Development Of 8-Inch Roll-To-Plate Nanoimprint Lithography(8-R2p-Nil) System With Uv-Led Exposure

Lithography, a significant tool in microchip manufacturing experiences major changes in lens material and design due to reduction of radiation wavelength used in conventional lithography tool. This is caused by shrinkage of microchip size in accordance to Moore's law over the years. This paves...

Full description

Saved in:
Bibliographic Details
Main Author: Lee, Lai Seng
Format: Thesis
Language:English
Published: 2019
Subjects:
T Technology
TJ Mechanical engineering and machinery
Online Access:http://eprints.usm.my/51482/1/The%20Development%20Of%208-Inch%20Roll-To-Plate%20Nanoimprint%20Lithography%288-R2p-Nil%29%20System%20With%20Uv-Led%20Exposure.pdf
http://eprints.usm.my/51482/
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.usm.eprints.51482
record_format eprints
spelling my.usm.eprints.51482 http://eprints.usm.my/51482/ The Development Of 8-Inch Roll-To-Plate Nanoimprint Lithography(8-R2p-Nil) System With Uv-Led Exposure Lee, Lai Seng T Technology TJ Mechanical engineering and machinery Lithography, a significant tool in microchip manufacturing experiences major changes in lens material and design due to reduction of radiation wavelength used in conventional lithography tool. This is caused by shrinkage of microchip size in accordance to Moore's law over the years. This paves way to the development of unconventional nanofabrication techniques with nanoimprint lithography is accepted as the most promising candidate. There are a few limitations in Thermal-Nanoimprint Lithography (Thermal-NIL). Thermal cycle and thermal mismatch causes low imprint throughput and building up of stress in substrate and imprint mold respectively. Besides, heating of thermoplastic film also contributes to high electricity consumption. In addition, large surface contact area between hard flat mold and resist in Thermal-NIL causes high imprint force and large demolding force. Furthermore, surface waviness of substrate and hard flat mold hinders conformal contact during imprinting. Apart from that, air traps in between resist and hard flat mold causes void defects. Therefore, in this work a prototype for 8-Inch Roll-To-Plate Nanoimprint Lithography system has been developed to overcome the limitations of Thermal-NIL. Quartz tube was employed as imprint roller to imprint patterns on silicon wafer. UV-LED was selected as UV curing source to cure SU-8 2002 photoresist. PDMS flexible molds were fabricated and were attached to quartz tube imprint roller to imprint patterns onto silicon wafer. Prior to imprinting process, a SU-8 2002 spun coated silicon wafer was placed onto vacuum chuck and was moved forward passing underneath a rotating imprint quartz tube. In the meantime, imprinted patterns on silicon wafer was cured by UV-LED. Shortly after curing, PDMS flexible mold was detached from imprinted structures in a 'line peeling' pattern. Experimental works were started with the fabrication of SU-8 2002 master molds and replication of PDMS flexible molds. With 1.00 mm/s of imprint linear speed, UV intensity of 2700 μW / cm2 was identified to be the most optimum level to provide sufficient UV dose for SU-8 2002 photoresist curing. The almost instant curing of SU-8 2002 photoresist by UV-LED greatly increases imprint throughput. Moreover, room temperature imprinting was achieved by using UV-LED as SU-8 2002 photoresist curing source. Result from imprint speed experimental work indicates that average imprint depth decreases from 1.04 μm to 0.73 μm with increases in imprint speed from 0.2 mm/s to 4.0 mm/s. Furthermore, increase in imprint force from 10.00 N to 14.00 N was observed to improve average imprint depth from 0.97 μm to 2.11 μm. Findings from experimental works suggests that the proposed 8-Inch Roll-To-Plate Nanoimprint Lithography system prototype effectively performs room temperature imprinting with UV-LED as resist curing source. In addition, the proposed method of fabricating PDMS flexible mold is an effective way to fabricate flexible mold. It is to my knowledge from literature, little effort being put into research of using UV-LED as resist curing source, micro heat pipe and copper heat pipe as heat dissipation elements. Moreover, little effort has been done to install UV-LED together with heat dissipation elements inside quartz tube imprint roller for R2P-NIL. 2019-02-01 Thesis NonPeerReviewed application/pdf en http://eprints.usm.my/51482/1/The%20Development%20Of%208-Inch%20Roll-To-Plate%20Nanoimprint%20Lithography%288-R2p-Nil%29%20System%20With%20Uv-Led%20Exposure.pdf Lee, Lai Seng (2019) The Development Of 8-Inch Roll-To-Plate Nanoimprint Lithography(8-R2p-Nil) System With Uv-Led Exposure. Masters thesis, Universiti Sains Malaysia.
institution Universiti Sains Malaysia
building Hamzah Sendut Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Sains Malaysia
content_source USM Institutional Repository
url_provider http://eprints.usm.my/
language English
topic T Technology
TJ Mechanical engineering and machinery
spellingShingle T Technology
TJ Mechanical engineering and machinery
Lee, Lai Seng
The Development Of 8-Inch Roll-To-Plate Nanoimprint Lithography(8-R2p-Nil) System With Uv-Led Exposure
description Lithography, a significant tool in microchip manufacturing experiences major changes in lens material and design due to reduction of radiation wavelength used in conventional lithography tool. This is caused by shrinkage of microchip size in accordance to Moore's law over the years. This paves way to the development of unconventional nanofabrication techniques with nanoimprint lithography is accepted as the most promising candidate. There are a few limitations in Thermal-Nanoimprint Lithography (Thermal-NIL). Thermal cycle and thermal mismatch causes low imprint throughput and building up of stress in substrate and imprint mold respectively. Besides, heating of thermoplastic film also contributes to high electricity consumption. In addition, large surface contact area between hard flat mold and resist in Thermal-NIL causes high imprint force and large demolding force. Furthermore, surface waviness of substrate and hard flat mold hinders conformal contact during imprinting. Apart from that, air traps in between resist and hard flat mold causes void defects. Therefore, in this work a prototype for 8-Inch Roll-To-Plate Nanoimprint Lithography system has been developed to overcome the limitations of Thermal-NIL. Quartz tube was employed as imprint roller to imprint patterns on silicon wafer. UV-LED was selected as UV curing source to cure SU-8 2002 photoresist. PDMS flexible molds were fabricated and were attached to quartz tube imprint roller to imprint patterns onto silicon wafer. Prior to imprinting process, a SU-8 2002 spun coated silicon wafer was placed onto vacuum chuck and was moved forward passing underneath a rotating imprint quartz tube. In the meantime, imprinted patterns on silicon wafer was cured by UV-LED. Shortly after curing, PDMS flexible mold was detached from imprinted structures in a 'line peeling' pattern. Experimental works were started with the fabrication of SU-8 2002 master molds and replication of PDMS flexible molds. With 1.00 mm/s of imprint linear speed, UV intensity of 2700 μW / cm2 was identified to be the most optimum level to provide sufficient UV dose for SU-8 2002 photoresist curing. The almost instant curing of SU-8 2002 photoresist by UV-LED greatly increases imprint throughput. Moreover, room temperature imprinting was achieved by using UV-LED as SU-8 2002 photoresist curing source. Result from imprint speed experimental work indicates that average imprint depth decreases from 1.04 μm to 0.73 μm with increases in imprint speed from 0.2 mm/s to 4.0 mm/s. Furthermore, increase in imprint force from 10.00 N to 14.00 N was observed to improve average imprint depth from 0.97 μm to 2.11 μm. Findings from experimental works suggests that the proposed 8-Inch Roll-To-Plate Nanoimprint Lithography system prototype effectively performs room temperature imprinting with UV-LED as resist curing source. In addition, the proposed method of fabricating PDMS flexible mold is an effective way to fabricate flexible mold. It is to my knowledge from literature, little effort being put into research of using UV-LED as resist curing source, micro heat pipe and copper heat pipe as heat dissipation elements. Moreover, little effort has been done to install UV-LED together with heat dissipation elements inside quartz tube imprint roller for R2P-NIL.
format Thesis
author Lee, Lai Seng
author_facet Lee, Lai Seng
author_sort Lee, Lai Seng
title The Development Of 8-Inch Roll-To-Plate Nanoimprint Lithography(8-R2p-Nil) System With Uv-Led Exposure
title_short The Development Of 8-Inch Roll-To-Plate Nanoimprint Lithography(8-R2p-Nil) System With Uv-Led Exposure
title_full The Development Of 8-Inch Roll-To-Plate Nanoimprint Lithography(8-R2p-Nil) System With Uv-Led Exposure
title_fullStr The Development Of 8-Inch Roll-To-Plate Nanoimprint Lithography(8-R2p-Nil) System With Uv-Led Exposure
title_full_unstemmed The Development Of 8-Inch Roll-To-Plate Nanoimprint Lithography(8-R2p-Nil) System With Uv-Led Exposure
title_sort development of 8-inch roll-to-plate nanoimprint lithography(8-r2p-nil) system with uv-led exposure
publishDate 2019
url http://eprints.usm.my/51482/1/The%20Development%20Of%208-Inch%20Roll-To-Plate%20Nanoimprint%20Lithography%288-R2p-Nil%29%20System%20With%20Uv-Led%20Exposure.pdf
http://eprints.usm.my/51482/
_version_ 1724608801162657792
score 13.211869

Similar Items