High accuracy dual output voltage reference circuit for differential 10-bit successive approximation register analog to digital converter using 180nm technology
Voltage reference circuit produces reference voltage that is independent of fabrication process, temperature and supply voltage (PVT) variation. Differential successive approximation register (SAR) analog to digital converter (ADC) that converts an analog signal to digital signal is very much dep...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2020
|
| Subjects: | |
| Online Access: | http://psasir.upm.edu.my/id/eprint/97820/1/FK%202020%2096%20-%20IR.1.pdf http://psasir.upm.edu.my/id/eprint/97820/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Voltage reference circuit produces reference voltage that is independent of fabrication
process, temperature and supply voltage (PVT) variation. Differential successive
approximation register (SAR) analog to digital converter (ADC) that converts an
analog signal to digital signal is very much dependent on accurate reference voltage
which defines the resolution of the converter. It requires two reference voltages
namely VREF and VCM. VREF is used to set the full-scale voltage range while the
common-mode voltage, VCM defines an initial value of most significant bit (MSB)
digital output. VCM is designed as such that it is half of VREF and independent of
process, voltage and temperature (PVT) variations. The deviation of the VCM develops
an offset that shifts the transfer function of the ADC. Consequently, it reduces the
dynamic range of the analog input to be digitised. The evolution of technology has
favoured in a system on chip integration of the voltage reference and SAR ADC
because it reduces design circuit area and consumes less power. However, based on
the previous literatures, the impact of voltage reference circuits integrated with SAR
ADC on a single die has not been discussed in depth. Hence, this thesis features the
design and implementation of a high accuracy dynamic dual output voltage reference
circuit for a 200kS/s differential 10-bit SAR ADC using a Silterra 0.18μm process
with a supply voltage of 1.8V on a common die. The measurement of the fabricated
chips is able to generate constant reference voltages for the VREF is that 1.2V±0.03V.
Meanwhile, the VCM deviates as much as ±4mV between temperatures ranging from
0 C and 80 C across ±10% voltage supply variation. The measurement result shows
that the circuit have sufficient drive capability to provide dual reference voltages to
the SAR ADC. The voltage reference circuit achieves a good performance on the SAR
ADC with 0.4LSB differential nonlinearity (DNL), 57.39dB Signal-to-noise and
distortion ratio (SINAD) and an effective number of bits (ENOB) of 9.5 bits. The voltage reference circuit functions accurately in temperature sensor application
between 0 C and 80 C temperature input range. |
|---|