Noise measurement in amplifying system for radiation detectors
Electronic noise is a critical parameter especially for electronic devices which deal with low level input signals such as preamplifier-shaper chains in nuclear instrumentation. It degrades the capability of the amplifying system as a radiation measurement device in terms of detection level, energy...
Saved in:
Main Authors: | Lombigit, Lojius, Khalid, Mohd Ashhar, Hamidon, Mohd Nizar, Sulaiman, Nasri |
---|---|
Format: | Conference or Workshop Item |
Language: | English |
Published: |
IEEE
2012
|
Online Access: | http://psasir.upm.edu.my/id/eprint/69570/1/Noise%20measurement%20in%20amplifying%20system%20for%20radiation%20detectors.pdf http://psasir.upm.edu.my/id/eprint/69570/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Low Cost front-end readout electronic for instrumentation used in Neutron experiments.
by: Lombigit, Lojius, et al.
Published: (2012) -
Development and characterization of readout electronics for neutron scattering instrumentation
by: Lojius, Lombigit
Published: (2012) -
Determination of Fano factor and pre-amplifier noise from the measurement of energy resolution of a HPGe detector
by: Samat, S.B., et al.
Published: (2015) -
Transistor sizing methodology for low noise charge sensitive amplifier with input transistor working in moderate inversion
by: Aimaier, Nueraimaiti, et al.
Published: (2014) -
Stimulus generation technique for code simulation of FPGA based gamma spectroscopy system
by: Abd Rahman, Nur Aira, et al.
Published: (2013)