The Effects of MAPCVD-Diamond Coating on the Phase Stability and Microstructure of Zirconia (Y-TZP) Cutting Tool Inserts
Yttria-tetragonal zirconia ceramics (Y-TZP) ceramics is considered as one of the most promising material for cutting tool applications due to its unique combination of chemical, physical and mechanical properties. Although Y-TZP ceramics is tough and strong, tool bits need to be simultaneously hard...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English English |
| Published: |
Universiti Putra Malaysia Press
2001
|
| Online Access: | http://psasir.upm.edu.my/id/eprint/3689/1/The_Effects_of_MAPCVD-Diamond_Coating_on_the_Phase.pdf http://psasir.upm.edu.my/id/eprint/3689/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Yttria-tetragonal zirconia ceramics (Y-TZP) ceramics is considered as one of the most promising material for cutting tool applications due to its unique combination of
chemical, physical and mechanical properties. Although Y-TZP ceramics is tough and strong, tool bits need to be simultaneously hard, tough and wear resistant. However, high
hardness is usually associated with brittleness. Hence, there always has to be a compromise between the desired hardness and the necessary toughness. In the present work, the effect of coating a thin film of diamond on the surface of Y-TZP inserts by employing Microwave Plasma Chemical Vapour Deposition (MAPCVD) technique was studied. The
Y-TZP inserts were prepared and sintered to full density at 1400·C prior to MAPCVD process. Selected sintered inserts were surface-ground using a coarse and fine SiC paper
while another was polished to 1 I'm finish prior to MAPCVD treatment. It has been found
that nucleation of CVD diamond particles only occurred on Y-TZP surface polished to 1
IJITl finish. X-ray diffraction (XRD) analysis performed on other Y-TZP inserts did not
revealed any strong peaks corresponding to crystaI line diamond phase and these were
confirmed using scanning electron microscopy (SEM). However, chemical reaction
between Zr and carbon from the reducing atmosphere in the chamber did occur in all
of the treated inserts to form a new phase, ZrC. Although diamond nucleation was not
observed in both the pre-ground and CVD treated surfaces, SEM examination of these
so treated surfaces revealed fine-grained structure believed to have recrystal lised from the
severely damaged ground surface. |
|---|