Evaluation linerboard properties from Malaysian cultivated kenaf soda-anthraquinone pulp versus commercial pulps.

Malaysian cultivated kenaf has been identified as a suitable raw material for linerboard production. This study examines the soda-antraquinone (soda-AQ) pulp of kenaf fibers versus old corrugated container (OCC) and unbleached softwood kraft pulps as the main sources for linerboard production. The r...

Full description

Saved in:
Bibliographic Details
Main Authors: Mossello, Ahmad Azizi, Harun, Jalaluddin, Ibrahim, Rushdan, Resalati, Hossien, Fallah Shamsi, Seyed Rashid, Md Tahir, Paridah, Mohad Yusoff, Mohd Nor
Format: Article
Language:English
English
Published: North Carolina State University 2010
Online Access:http://psasir.upm.edu.my/id/eprint/14588/1/Evaluation%20linerboard%20properties%20from%20Malaysian%20cultivated%20kenaf%20soda.pdf
http://psasir.upm.edu.my/id/eprint/14588/
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Malaysian cultivated kenaf has been identified as a suitable raw material for linerboard production. This study examines the soda-antraquinone (soda-AQ) pulp of kenaf fibers versus old corrugated container (OCC) and unbleached softwood kraft pulps as the main sources for linerboard production. The results showed significant differences among the pulp properties. The unbleached kraft pulp with very high freeness required high beating to reach an optimized freeness and produced paper with the highest strength properties, except for tear resistance. The OCC gave paper with the lowest strength properties. In the case of kenaf fractions, bast pulp with high freeness needed less beating than softwood and produced paper with high tear resistance. Core fiber, which had the lowest freeness and highest drainage time, led to paper with high strength but very low tear resistance. Kenaf whole stem pulp showed intermediate properties between core and bast and close to those of unbleached softwood pulp, but with very lower beating requirement. Finally, kenaf whole stem, due to its strength properties, moderate separation cost, and simple pulping process, was judged to be more suitable for commercialization for linerboard production in Malaysia.