Investigation microstructure and mechanical characteristics of sugar palm fibre ash reinforced LM26 Al-matrix composites
Aluminium alloy of grade LM26 was used as a matrix and sugar palm fiber ash (SPFA) as reinforcement to investigate its microstructural and mechanical characteristics. Stir casting, a cost-effective method of casting was utilized to fabricate the composites, by altering SPFA from 0 to 10 wt% in 2 wt%...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Published: |
King Mongkut’s University of Technology North Bangkok
2023
|
| Online Access: | http://psasir.upm.edu.my/id/eprint/109034/ https://ojs.kmutnb.ac.th/index.php/ijst/article/view/6770 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Aluminium alloy of grade LM26 was used as a matrix and sugar palm fiber ash (SPFA) as reinforcement to investigate its microstructural and mechanical characteristics. Stir casting, a cost-effective method of casting was utilized to fabricate the composites, by altering SPFA from 0 to 10 wt% in 2 wt% increments in an LM26 Al-alloy matrix. The microstructural analysis and phase identification were identified with Scanning Electron Microscopy (SEM) attached to Energy Dispersive Spectroscopy (EDS) and X-ray Diffraction (XRD), respectively. The composites were tested for density, hardness, tensile strength, compression strength, and impact energy according to ASTM. Microstructural images revealed a homogeneous distribution of SPFA in the LM26 Al-alloy matrix. The phases identified in the composites were α-Al, hard SiO2, Mg2Si, and Al5FeSi. The addition of SPFA decreased the composite density and impact energy by 3.85% and 46.68%, respectively. The compression strength and tensile strength of the composites increased by 23.73% and 27.83%, respectively, at an 8 wt% addition of SPFA. However, further addition of up to 10 wt% SPFA showed a decreasing trend in compression and tensile strength. The hardness of the composites increased by 60.80% after a 10 wt% addition of SPFA. These findings showed that synthesized LM26 Al-SPFA composites could be used in the automotive industries for the fabrication of pistons, connecting rods, brake shoes, and other components due to their excellent mechanical characteristics. |
|---|