Impact of low-k devices on failure mode of flip chip tensile pull test
In this paper, the failure mode and solder bump strength for low-k flip chip devices were determined using die pull technique. The results show there is no significant difference between low-k and non low-k devices in terms of bumps strength for the amount of taffy in this device. However, there is...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | |
| Published: |
2017
|
| Online Access: | http://dspace.uniten.edu.my:8080/jspui/handle/123456789/5303 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | In this paper, the failure mode and solder bump strength for low-k flip chip devices were determined using die pull technique. The results show there is no significant difference between low-k and non low-k devices in terms of bumps strength for the amount of taffy in this device. However, there is different in failure mode which shows an increasing in VRO and SRO failure mode. Die pull test within a time and bake factor also help to minimize VRO and SRO failure mode. However, VRO and SRO failure mode were expected as an another impact of low-k materials on flip chip packaging. ©2006 IEEE. |
|---|