Staff View: Effect of tool holder geometry and cutting condition when milling nickel-based alloy 242

Effect of tool holder geometry and cutting condition when milling nickel-based alloy 242

This paper presents an experimental study about the influence of tool holder's geometry and cutting parameters on tool wear and tool life when milling nickel based alloy 242 with carbide inserts of different coatings. In this study, TiAlN, TiCN/TiN, TiAlN/TiN and TiCN/Al2O3 coated carbide inser...

Full description

Saved in:

Bibliographic Details
Main Authors:	Habeeb H.H., Abou-El-Hossein K.A., Mohammad B., Kadirgama K.
Other Authors:	18041935600
Format:	Article
Published:	2023
Subjects:	Alloys 242 Flank wear Tool holder geometry Tool life Carbides Coatings Computational geometry Cutting Milling (machining) Nickel alloys
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my.uniten.dspace-30978
record_format	dspace
spelling	my.uniten.dspace-309782023-12-29T15:57:09Z Effect of tool holder geometry and cutting condition when milling nickel-based alloy 242 Habeeb H.H. Abou-El-Hossein K.A. Mohammad B. Kadirgama K. 18041935600 8367728100 35801233900 12761486500 Alloys 242 Flank wear Tool holder geometry Tool life Carbides Coatings Computational geometry Cutting Milling (machining) Flank wear Tool holder geometry Tool life Nickel alloys This paper presents an experimental study about the influence of tool holder's geometry and cutting parameters on tool wear and tool life when milling nickel based alloy 242 with carbide inserts of different coatings. In this study, TiAlN, TiCN/TiN, TiAlN/TiN and TiCN/Al2O3 coated carbide inserts were employed. Aerospace and power industries are the most common users of nickel-based alloys because of their good strength to weight ratio and superior corrosion resistance. However machining of these alloys is a very difficult task due to their poor machineability. In this study, it was found that during machining of nickel-based alloys 242 with a tool holder providing geometry of 90� shoulder cutting, the tool wear rate progressed more rapidly compared to the 70�-tool holder. Generally, the cutting inserts were rejected mainly due to intensive wear on the flank face and the surrounding area. High abrasion wear was observed on the flank face of the cutting tools. It was observed that the TiCN/Al2O3 coating demonstrated more susceptibility to edge chipping compared to the other types of coating. � 2007 Elsevier B.V. All rights reserved. Final 2023-12-29T07:57:08Z 2023-12-29T07:57:08Z 2008 Article 10.1016/j.jmatprotec.2007.11.154 2-s2.0-41549136581 https://www.scopus.com/inward/record.uri?eid=2-s2.0-41549136581&doi=10.1016%2fj.jmatprotec.2007.11.154&partnerID=40&md5=15e203025171127650c07fb1e1c0d663 https://irepository.uniten.edu.my/handle/123456789/30978 201 01/03/2023 483 485 Scopus
institution	Universiti Tenaga Nasional
building	UNITEN Library
collection	Institutional Repository
continent	Asia
country	Malaysia
content_provider	Universiti Tenaga Nasional
content_source	UNITEN Institutional Repository
url_provider	http://dspace.uniten.edu.my/
topic	Alloys 242 Flank wear Tool holder geometry Tool life Carbides Coatings Computational geometry Cutting Milling (machining) Flank wear Tool holder geometry Tool life Nickel alloys
spellingShingle	Alloys 242 Flank wear Tool holder geometry Tool life Carbides Coatings Computational geometry Cutting Milling (machining) Flank wear Tool holder geometry Tool life Nickel alloys Habeeb H.H. Abou-El-Hossein K.A. Mohammad B. Kadirgama K. Effect of tool holder geometry and cutting condition when milling nickel-based alloy 242
description	This paper presents an experimental study about the influence of tool holder's geometry and cutting parameters on tool wear and tool life when milling nickel based alloy 242 with carbide inserts of different coatings. In this study, TiAlN, TiCN/TiN, TiAlN/TiN and TiCN/Al2O3 coated carbide inserts were employed. Aerospace and power industries are the most common users of nickel-based alloys because of their good strength to weight ratio and superior corrosion resistance. However machining of these alloys is a very difficult task due to their poor machineability. In this study, it was found that during machining of nickel-based alloys 242 with a tool holder providing geometry of 90� shoulder cutting, the tool wear rate progressed more rapidly compared to the 70�-tool holder. Generally, the cutting inserts were rejected mainly due to intensive wear on the flank face and the surrounding area. High abrasion wear was observed on the flank face of the cutting tools. It was observed that the TiCN/Al2O3 coating demonstrated more susceptibility to edge chipping compared to the other types of coating. � 2007 Elsevier B.V. All rights reserved.
author2	18041935600
author_facet	18041935600 Habeeb H.H. Abou-El-Hossein K.A. Mohammad B. Kadirgama K.
format	Article
author	Habeeb H.H. Abou-El-Hossein K.A. Mohammad B. Kadirgama K.
author_sort	Habeeb H.H.
title	Effect of tool holder geometry and cutting condition when milling nickel-based alloy 242
title_short	Effect of tool holder geometry and cutting condition when milling nickel-based alloy 242
title_full	Effect of tool holder geometry and cutting condition when milling nickel-based alloy 242
title_fullStr	Effect of tool holder geometry and cutting condition when milling nickel-based alloy 242
title_full_unstemmed	Effect of tool holder geometry and cutting condition when milling nickel-based alloy 242
title_sort	effect of tool holder geometry and cutting condition when milling nickel-based alloy 242
publishDate	2023
_version_	1806426636343574528
score	13.235598

Effect of tool holder geometry and cutting condition when milling nickel-based alloy 242

Similar Items