Staff View: Failure investigation on reheater tube due to deposit and wall thinning

Failure investigation on reheater tube due to deposit and wall thinning

Failure analysis of a reheater tube showed that the failure was caused by overheating and wall thinning. Finite element modeling, dimensional measurements, and microscopic examinations were performed to investigate the root cause of the failure. Wall thinning, due to excessive coal-ash corrosion, an...

Full description

Saved in:

Bibliographic Details
Main Authors:	Purbolaksono J., Tarlochan F., Rahman M.M., Nordin N.F., Ahmad B.
Other Authors:	8621252500
Format:	Article
Published:	2023
Subjects:	Boiler material Deposits Failure analysis High temperature Thinning Tube burst Boiler deposits Boilers Corrosion Microscopic examination Safety factor Scale (deposits) Tubes (components) Dimensional measurements Failure investigation Finite element modeling Inner tubes Reheater tubes Root cause Scale formation Wall thinning Quality assurance
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my.uniten.dspace-30916
record_format	dspace
spelling	my.uniten.dspace-309162023-12-29T15:55:50Z Failure investigation on reheater tube due to deposit and wall thinning Purbolaksono J. Tarlochan F. Rahman M.M. Nordin N.F. Ahmad B. 8621252500 9045273600 55328831100 26326390700 36781813400 Boiler material Deposits Failure analysis High temperature Thinning Tube burst Boiler deposits Boilers Corrosion Failure analysis Microscopic examination Safety factor Scale (deposits) Tubes (components) Boiler material Dimensional measurements Failure investigation Finite element modeling High temperature Inner tubes Reheater tubes Root cause Scale formation Thinning Tube burst Wall thinning Quality assurance Failure analysis of a reheater tube showed that the failure was caused by overheating and wall thinning. Finite element modeling, dimensional measurements, and microscopic examinations were performed to investigate the root cause of the failure. Wall thinning, due to excessive coal-ash corrosion, and overheating, due to scale buildup on the tube were measured, and estimations, the average corrosion and scale growth rates, were made. The combination of excessive scale formation on the inner tube surfaces and wall thinning due to coal-ash corrosion on the outer tube surfaces combined to cause the failure of the reheater tube. � 2009 ASM International. Final 2023-12-29T07:55:49Z 2023-12-29T07:55:49Z 2009 Article 10.1007/s11668-009-9250-1 2-s2.0-70449523211 https://www.scopus.com/inward/record.uri?eid=2-s2.0-70449523211&doi=10.1007%2fs11668-009-9250-1&partnerID=40&md5=9667abdb1fabe5c565ad4a465ff0e790 https://irepository.uniten.edu.my/handle/123456789/30916 9 4 365 369 Scopus
institution	Universiti Tenaga Nasional
building	UNITEN Library
collection	Institutional Repository
continent	Asia
country	Malaysia
content_provider	Universiti Tenaga Nasional
content_source	UNITEN Institutional Repository
url_provider	http://dspace.uniten.edu.my/
topic	Boiler material Deposits Failure analysis High temperature Thinning Tube burst Boiler deposits Boilers Corrosion Failure analysis Microscopic examination Safety factor Scale (deposits) Tubes (components) Boiler material Dimensional measurements Failure investigation Finite element modeling High temperature Inner tubes Reheater tubes Root cause Scale formation Thinning Tube burst Wall thinning Quality assurance
spellingShingle	Boiler material Deposits Failure analysis High temperature Thinning Tube burst Boiler deposits Boilers Corrosion Failure analysis Microscopic examination Safety factor Scale (deposits) Tubes (components) Boiler material Dimensional measurements Failure investigation Finite element modeling High temperature Inner tubes Reheater tubes Root cause Scale formation Thinning Tube burst Wall thinning Quality assurance Purbolaksono J. Tarlochan F. Rahman M.M. Nordin N.F. Ahmad B. Failure investigation on reheater tube due to deposit and wall thinning
description	Failure analysis of a reheater tube showed that the failure was caused by overheating and wall thinning. Finite element modeling, dimensional measurements, and microscopic examinations were performed to investigate the root cause of the failure. Wall thinning, due to excessive coal-ash corrosion, and overheating, due to scale buildup on the tube were measured, and estimations, the average corrosion and scale growth rates, were made. The combination of excessive scale formation on the inner tube surfaces and wall thinning due to coal-ash corrosion on the outer tube surfaces combined to cause the failure of the reheater tube. � 2009 ASM International.
author2	8621252500
author_facet	8621252500 Purbolaksono J. Tarlochan F. Rahman M.M. Nordin N.F. Ahmad B.
format	Article
author	Purbolaksono J. Tarlochan F. Rahman M.M. Nordin N.F. Ahmad B.
author_sort	Purbolaksono J.
title	Failure investigation on reheater tube due to deposit and wall thinning
title_short	Failure investigation on reheater tube due to deposit and wall thinning
title_full	Failure investigation on reheater tube due to deposit and wall thinning
title_fullStr	Failure investigation on reheater tube due to deposit and wall thinning
title_full_unstemmed	Failure investigation on reheater tube due to deposit and wall thinning
title_sort	failure investigation on reheater tube due to deposit and wall thinning
publishDate	2023
_version_	1806428246159392768
score	13.222552

Failure investigation on reheater tube due to deposit and wall thinning

Similar Items