Tool life and wear mechanism when machining Hastelloy C-22HS
This paper describes the wear mechanism and tool life when machining Hastelloy C-22HS with coated carbide. The experiment was conducted using four different cutting tool materials under wet condition - namely, Physical Vapor Deposition (PVD) coated with TiAlN; TiN/TiCN/TiN; Chemical Vapor Deposition...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Other Authors: | |
| Format: | Article |
| Published: |
2023
|
| Subjects: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| id |
my.uniten.dspace-30479 |
|---|---|
| record_format |
dspace |
| spelling |
my.uniten.dspace-304792023-12-29T15:48:19Z Tool life and wear mechanism when machining Hastelloy C-22HS Kadirgama K. Abou-El-Hossein K.A. Noor M.M. Sharma K.V. Mohammad B. 12761486500 8367728100 55196353400 8417385700 35801233900 Cutting tools Electron microscopy Other materials Wear testing Behavioral research Carbides Chemical vapor deposition Coated materials Equipment Failure analysis Machine tools Machining Materials testing Metal working tools Physical vapor deposition Tribology Wear of materials Built up edge Current parameters Cutting edges Cutting parameters Flank wear Hastelloy Other materials Physical vapor depositions (pvd) Tool failures Tool life Tool materials Tool-failure mode Wear mechanisms Wear-testing Wet conditions Cutting tools This paper describes the wear mechanism and tool life when machining Hastelloy C-22HS with coated carbide. The experiment was conducted using four different cutting tool materials under wet condition - namely, Physical Vapor Deposition (PVD) coated with TiAlN; TiN/TiCN/TiN; Chemical Vapor Deposition (CVD) coated with TiN/TiCN/Al2O3; and TiN/TiCN/TiN - to study the tool behavior, in terms of wear and tool life machining of Hastelloy C-22HS. Tool failure modes and wear mechanism were examined at various cutting parameters. Flank wear, chipping, notching, plastic lowering at cutting edge, catastrophic and wear at nose were found to be the predominant tool failure for the four types of cutting tools, especially with CVD tools. Attrition/adhesion, oxidation and built-up edge (BUE) are the wear mechanisms observed in all cutting tools. The results obtained indicated that PVD cutting tools performed better than CVD cutting tools, in terms of tool life with current parameters. � 2010 Elsevier B.V. Final 2023-12-29T07:48:19Z 2023-12-29T07:48:19Z 2011 Article 10.1016/j.wear.2010.10.067 2-s2.0-78650679324 https://www.scopus.com/inward/record.uri?eid=2-s2.0-78650679324&doi=10.1016%2fj.wear.2010.10.067&partnerID=40&md5=ecd1c44bb0b1ce7fb3e3c83aefe3ef31 https://irepository.uniten.edu.my/handle/123456789/30479 270 03/04/2023 258 268 Scopus |
| institution |
Universiti Tenaga Nasional |
| building |
UNITEN Library |
| collection |
Institutional Repository |
| continent |
Asia |
| country |
Malaysia |
| content_provider |
Universiti Tenaga Nasional |
| content_source |
UNITEN Institutional Repository |
| url_provider |
http://dspace.uniten.edu.my/ |
| topic |
Cutting tools Electron microscopy Other materials Wear testing Behavioral research Carbides Chemical vapor deposition Coated materials Equipment Failure analysis Machine tools Machining Materials testing Metal working tools Physical vapor deposition Tribology Wear of materials Built up edge Current parameters Cutting edges Cutting parameters Flank wear Hastelloy Other materials Physical vapor depositions (pvd) Tool failures Tool life Tool materials Tool-failure mode Wear mechanisms Wear-testing Wet conditions Cutting tools |
| spellingShingle |
Cutting tools Electron microscopy Other materials Wear testing Behavioral research Carbides Chemical vapor deposition Coated materials Equipment Failure analysis Machine tools Machining Materials testing Metal working tools Physical vapor deposition Tribology Wear of materials Built up edge Current parameters Cutting edges Cutting parameters Flank wear Hastelloy Other materials Physical vapor depositions (pvd) Tool failures Tool life Tool materials Tool-failure mode Wear mechanisms Wear-testing Wet conditions Cutting tools Kadirgama K. Abou-El-Hossein K.A. Noor M.M. Sharma K.V. Mohammad B. Tool life and wear mechanism when machining Hastelloy C-22HS |
| description |
This paper describes the wear mechanism and tool life when machining Hastelloy C-22HS with coated carbide. The experiment was conducted using four different cutting tool materials under wet condition - namely, Physical Vapor Deposition (PVD) coated with TiAlN; TiN/TiCN/TiN; Chemical Vapor Deposition (CVD) coated with TiN/TiCN/Al2O3; and TiN/TiCN/TiN - to study the tool behavior, in terms of wear and tool life machining of Hastelloy C-22HS. Tool failure modes and wear mechanism were examined at various cutting parameters. Flank wear, chipping, notching, plastic lowering at cutting edge, catastrophic and wear at nose were found to be the predominant tool failure for the four types of cutting tools, especially with CVD tools. Attrition/adhesion, oxidation and built-up edge (BUE) are the wear mechanisms observed in all cutting tools. The results obtained indicated that PVD cutting tools performed better than CVD cutting tools, in terms of tool life with current parameters. � 2010 Elsevier B.V. |
| author2 |
12761486500 |
| author_facet |
12761486500 Kadirgama K. Abou-El-Hossein K.A. Noor M.M. Sharma K.V. Mohammad B. |
| format |
Article |
| author |
Kadirgama K. Abou-El-Hossein K.A. Noor M.M. Sharma K.V. Mohammad B. |
| author_sort |
Kadirgama K. |
| title |
Tool life and wear mechanism when machining Hastelloy C-22HS |
| title_short |
Tool life and wear mechanism when machining Hastelloy C-22HS |
| title_full |
Tool life and wear mechanism when machining Hastelloy C-22HS |
| title_fullStr |
Tool life and wear mechanism when machining Hastelloy C-22HS |
| title_full_unstemmed |
Tool life and wear mechanism when machining Hastelloy C-22HS |
| title_sort |
tool life and wear mechanism when machining hastelloy c-22hs |
| publishDate |
2023 |
| _version_ |
1806423432424849408 |
| score |
13.211869 |